[Modèle de processeur]:T536
[Fréquence]: 1,6 GHz
[Mémoire]:2 GB
[Stockage]:16 GB
[Dimensions]:45 x 43 x 3,5 mm
[Poids du produit]:15,8 ± 2 g
[Introduction]:Ebyte's ECK33-B series core boards are carefully designed based on Allwinner's T536 series processors. Featuring a new LGA interface, they offer high performance, low power consumption, high reliability, and are manufactured domestically. They are widely used in content sharing and self-service terminals, smart manufacturing, and other electronic commerce and industrial equipment.
| Function | Functional Description |
| CPU | T536MX-CEN2 / T536MX-CEX; |
| Quad-core ARM Cortex-A55, up to 1.6GHz; | |
| E907 RISC-V MCU, up to 600MHz; | |
| NPU up to 2 TOPS (CEX not support); | |
| ECC Protection; | |
| ISP | Supports multiple sensor (up to 4) inputs; |
| Supports raw8/10/12/14/16; | |
| Performance of one sensor: | |
| Online: 5M@30fps (linear), 5M@30fps(2f-wdr); | |
| Offline: 8M@30fps (linear), 8M@30fps (2f-wdr); | |
| MEM | On board 2GB LPDDR4 / 4GB LPDDR4; |
| FLASH | On board 16GB / 32GB eMMC; |
| Video Engine | MJPEG Decoder, up to 3840 x 2160@15fps; |
| JPEG Decoder, up to 1920 x 1080@60fps; | |
| H.264 Encoder, up to 3840 x 2160@25fps; | |
| JPEG Encoder, up to 3840 x 2160@15fps; | |
| MJPEG Encoder, up to 3840 x 2160@15fps; | |
| Video Output | 1x Dual-link LVDS, up to 1920 x 1080@60fps; |
| 1x 4-lane MIPI DSI, up to 1920 x 1200@60fps; | |
| 1x RGB, up to 1920 x 1200@60fps; | |
| Video Input | 4+4-lane or 4+2+2-lane or 2+2+2+2-lane MIPI CSI; |
| 8/10/12/16-bit Parallel CSI; | |
| Audio | 1x audio differential lineout output: LINEOUTP/N; |
| 4x I2S/PCM interfaces (I2S0, I2S1, I2S2, and I2S3); | |
| Supports maximum 8 digital PDM microphones; | |
| 1x OWA TX and 1x OWA RX, compliant with S/PDIF interface; | |
| GMAC | 2x 10/100/1000Mbit/s Ethernet with RGMII and RMII interfaces; |
| SMHC | 2x SD/MMC Host Controller (SMHC) interfaces; |
| SMHC0, compliant Secure Digital Memory (up to SD3.0); | |
| SMHC1, compliant Secure Digital I/O (up to SDIO3.0); | |
| PCIe | 1x PCIe2.1&USB3.1 combo PHY; |
| Compliance to PCI Express Base Specification, Revision 2.1; | |
| Supports 1 lane link width, Root Complex (RC) mode; | |
| USB | 1 x USB2.0 Host; |
| 2 x USB2.0 DRD; | |
| 1 x USB3.1 DRD&PCIe2.1 Combo; | |
| Local Bus | 1x 8/16-bit wide Local Bus; |
| UART | 17x UART, compatible with industry-standard 16450/16550; |
| TWI | 6x TWI, compliant with I2C bus standard; |
| SPI | 5x SPI, support SPI mode and display bus interface (DBI) mode; |
| CAN | 4x CAN-FD ports (up to 64 data bytes); |
| PWM | 30x PWM channels and 4x S-PWM channels; |
| ADC | 1x LRADC, 6-bit resolution up to 2KHz sampling rate; |
| 28x GPADC, 12-bit resolution up to 1MHz sampling rate; | |
| LED | Maximum 1024 LEDs serial connect; |
| AND | 1x IR_TX interface, 4x IR_RX interface; |
| GPIO | 199x GPIOs and GPIO interrupt input; |