[Signal d'interface]：RS485/RS422/RS232
[Tension de fonctionnement]：DC 8-28 V
[Méthode d'installation]：Installation du trou de positionnement
[Protocoles réseau]： IP, TCP/UDP, IPv4, ICMP, APR, DHCP, DNS, HTTP, MQTT
[Dimensions]：145 x 103 x 28 mm
[Poids du produit]：350 ± 5 g
[Introduction]：Le NB124E-V2 est un serveur série double port de deuxième génération développé par Ebyte. Il intègre une pile de protocoles TCP/IP et permet la transmission bidirectionnelle et transparente de données série vers Ethernet, la conversion de protocole Modbus et la connectivité cloud des périphériques série. Il prend en charge la configuration de l'ordinateur hôte, facilitant ainsi la mise en réseau et la connectivité cloud des périphériques série. Il est largement utilisé dans des secteurs tels que la surveillance des salles informatiques, la surveillance environnementale, le transport intelligent, le contrôle des portails et les casiers express intelligents. Il est doté d'un revêtement conforme pour une résistance à la moisissure, à l'humidité et au brouillard salin.
Magasin officiel
| Serial number | name | Function | illustrate |
| 1 | RS232-2 | Serial port 2-RS232 interface | Standard DB9 female connector, 2-TXD, 3-RXD, 5-GND |
| 2 | RS232-1 | Serial port 1-RS232 interface | Standard DB9 female connector, 2-TXD, 3-RXD, 5-GND |
| 3 | RS422-1-R+ | Serial port 1-RS422 interface-R+ | 3.81mm Phoenix terminal |
| 4 | RS422-1-R- | Serial port 1-RS422 interface-R- | 3.81mm Phoenix terminal |
| 5 | GND | Serial port 1 ground terminal | 3.81mm Phoenix terminal |
| 6 | RS422-1-T+/A | Serial port 1-RS422 interface-T+ | 3.81mm Phoenix terminal |
| Serial port 1-RS485 interface A | |||
| 7 | RS422-1-T-/B | Serial port 1-RS422 interface-T- | 3.81mm Phoenix terminal |
| Serial port 1-RS485 port B | |||
| 8 | RS422-2-R+ | Serial port 2-RS422 interface-R+ | 3.81mm Phoenix terminal |
| 9 | RS422-2-R- | Serial port 2-RS422 interface-R- | 3.81mm Phoenix terminal |
| 10 | GND | Serial port 2 ground terminal | 3.81mm Phoenix terminal |
| 11 | RS422-2-T+/A | Serial port 2-RS422 interface-T+ | 3.81mm Phoenix terminal |
| Serial port 2-RS485 interface A | |||
| 12 | RS422-2-T-/B | Serial port 2-RS422 interface-T- | 3.81mm Phoenix terminal |
| Serial port 2-RS485 interface B | |||
| 13 | - | Negative terminal of DC 8-28 V | DC 8-28 V, 5.08mm Phoenix terminal; |
| 14 | + | Positive terminal of DC 8-28 V | DC 8-28 V, 5.08mm Phoenix terminal; |
| 15 | DC-IN | DC power input | DC 8-28 V; |
| 5.5mm outer diameter, 2.0mm inner diameter straight-in round hole; | |||
| 16 | Ethernet | Ethernet interface | Standard RJ45 Ethernet interface |
| 17 | Reload | Restore factory button | Press and hold for 5 seconds, then NET will light up for 5 seconds, and the device will be restored to factory settings. |
| Label | Function | illustrate |
| POWER | Power indicator | Lights up after DC 8-28V power input |
| NET | Network indicator light | No network cable connected: off; network cable connected: on; |
| LINK1 | Channel 1 status indicator | Link not connected: the indicator light is off; Link connected successfully: the indicator light is always on; UDP mode: the indicator light is always on; |
| DATA1 | Channel 1 data indicator | Flashes when the network or serial port is sending or receiving data; |
| LINK2 | Channel 2 status indicator | Link not connected: the indicator light is off; Link connected successfully: the indicator light is always on; UDP mode: the indicator light is always on; |
| DATA2 | Channel 2 data indicator | Flashes when the network or serial port is sending or receiving data; |