Ebyte MA01-XXCX0080 Module IO série RS485 Prise en charge du mode de sortie MODBUS DI et DO
[Caractéristiques]：8DO
[Méthode d'installation]：rail
[Sortie numérique]：8
[Tension de travail]：8~28V (DC)
[Interface]：RS485
[Poids du produit]：250g ± 5g
[Taille]：115*90mm
[Introduction]：MA01 -XXCX0080 est un logiciel de configuration de support ou un automate, via le port série (RS485) a émis des instructions pour contrôler la sortie de commutation à 8 relais (DO), La coque adopte un revêtement à trois niveaux : antifongique, anti-humidité et anti-sel.pour obtenir la fonction de contrôle à distance du module de réseau d'e/s série (également appelé « IO à distance ").
Magasin officiel
| Serial number | Pin | Pin direction | remarks |
|---|---|---|---|
| 1 | + | Power supply . . | It is recommended that RVV 2 x 0.75 wire |
| 2 | ﹣ | Ground - | It is recommended that RVV 2 x 0.75 wire |
| 3 | B/RX | RS485 corresponds to B | It is recommended that RVSP 3 x 0.5 wire |
| 4 | A/TX | RS485 corresponds to A | It is recommended that RVSP 3 x 0.5 wire |
| 5 | GND | The signal is grounded | It is recommended that RVSP 3 x 0.5 wire |
| 6 | DO8 | Switch output channel 8 | Relays have normal open and normal closed ends |
| 7 | DO7 | Switch output channel 7 | Relays have normal open and normal closed ends |
| 8 | DO6 | Switch output channel 6 | Relays have normal open and normal closed ends |
| 9 | DO5 | Switch output channel 5 | Relays have normal open and normal closed ends |
| 10 | DO4 | Switch output channel 4 | Relays have normal open and normal closed ends |
| 11 | DO3 | Switch output channel 3 | Relays have normal open and normal closed ends |
| 12 | DO2 | Switch output channel 2 | Relays have normal open and normal closed ends |
| 13 | DO1 | Switch output channel 1 | Relays have normal open and normal closed ends |