[Specifications]：1DI + 1DO
[Communication interface]：RS485
[Working voltage]：DC 8~28V
[Installation method]：guide rail + positioning hole
[Product size]：54*90*32mm
[Product weight]：74±5g
[Introduction]：MA01-AXCX1010-V2 est un module réseau d'E/S série (également appelé « E/S distantes »). Il prend en charge l'acquisition d'entrées de capteurs unidirectionnels (DI), la conversion en données série pour transmission vers un logiciel de configuration ou un automate programmable, et l'envoi de commandes via le port série pour le contrôle de sorties de relais unidirectionnels (DO) afin de réaliser des fonctions d'acquisition et de contrôle à distance. Ce produit est traité avec trois traitements anti-moisissures, anti-humidité et anti-buée saline.
Magasin officiel| category | name | parameter |
| power supply | Operating voltage | DC 8～28V |
| Operating current | 50mA @12V | |
| Power indicator | Green LED indicator | |
| serial port | Communication interface | RS485 |
| baud rate | 1200bps～115200 bps (default 9600 bps) | |
| Data bits | 8 (fixed) | |
| Check bit | No parity, odd parity, even parity (default is no parity) | |
| Stop bit | 1 (fixed) | |
| Communication Protocol | Modbus RTU protocol | |
| Device address | 0~255 (default address 1, 0 is the broadcast address) | |
| indicator lights | The red LED remains lit after power-on; during communication, it flashes with a 60ms cycle. | |
| DI Input | DI channels | Routes 1/2/3/4 |
| Interface type | wet nodes | |
| Triggering method | Rising edge, falling edge, level (default rising edge trigger) | |
| Filter parameters | 1 to 16 (default 6) | |
| sampling frequency | 1 kHz | |
| DO output | DO path | Routes 1/2/3/4 |
| DO output type | Type C relay (normally open + normally closed) | |
| DO output mode | Level mode, pulse mode, follow mode, loop mode | |
| Relay contact capacity | 30V/10A、250V/10A | |
| Output Indicator | Red LED indicator | |
| other | Product Dimensions | MA01-AXCX1010-V2(P) 54*90*32(mm) |
| MA01-AXCX2020-V2(P) 90*90*40(mm) | ||
| MA01-AXCX3030-V2(P) 90*90*40(mm) | ||
| MA01-AXCX4040-V2(P) 115*90*40(mm) | ||
| Product weight | MA01-AXCX1010-V2 74±5g | |
| MA01-AXCX1010-V2P 75±5g | ||
| MA01-AXCX2020-V2 121±5g | ||
| MA01-AXCX2020-V2P 123±5g | ||
| MA01-AXCX3030-V2 133±5g | ||
| MA01-AXCX3030-V2P 134±5g | ||
| MA01-AXCX4040-V2 164±5g | ||
| MA01-AXCX4040-V2P 165±5g | ||
| Operating temperature and humidity | -40 to +85℃, 5% to 95%RH (non-condensing) | |
| Storage temperature and humidity | -60 to +125°C, 5% to 95%RH (non-condensing) | |
| Installation method | Guide rail and positioning hole installation |