M31-XXXB0008G-U-PN 8AO Module hôte d'E/S distribuées Profinet Interface Profinet vers Modbus RTU - Nombreuses E/S disponibles
[Dimensions]：110*40*100 mm
[Poids]：180 ± 5 g
[Introduction]：La série M31-U-PN est un module hôte d'E/S distribuées distantes prenant en charge le protocole Profinet. Il permet de mapper les données d'E/S vers Profinet. L'intégration s'effectue via des fichiers GSD, permettant aux automates programmables de lire et d'écrire sur les ports d'E/S sans programmation. Compatible avec divers automates Siemens, notamment les modèles S7-200smart, S7-300, S7-200, S7-1500 et S7-1500. Ce module dispose de deux ports réseau, prend en charge les fonctions de commutation et intègre une passerelle Profinet vers Modbus RTU. Son revêtement de protection le préserve des moisissures, de l'humidité et des embruns salins.
Magasin officiel| Profinet Distributed I/O Host | ||
| category | name | parameter |
| power supply | Operating voltage | DC 9～36V; with reverse polarity protection |
| Power indicator | RUN red LED indicator | |
| Power consumption | 2～4W | |
| communication | Communication interface | RJ45*2 (dual network ports), RS485 |
| Communication Protocol | Standard Profinet (RT) protocol | |
| Internal bus | Up to 1ms | |
| DI Input | Input type | NPN、PNP |
| Input range | DC 10～28V | |
| Isolation methods | Each channel is individually opto-isolated. | |
| Input impedance | 7.2kΩ | |
| sampling frequency | 1000 Hz | |
| Counting frequency | ＜500Hz | |
| Filtering time | Default time 6ms | |
| Input Instructions | DI Green LED Indicator | |
| AI Input | Acquisition characteristics | Single-ended input/differential input (model optional) |
| Input type | Single-ended current: 0-20mA, 4-20mA | |
| Differential current: 0-20mA, 4-20mA, ±20mA | ||
| Differential voltage: 0-5V, ±5V, 0-10V, ±10V | ||
| Single-ended voltage: 0-5V, 0-10V | ||
| AI resolution | 16-bit (differential) | |
| AI precision | 1‰ (differential) / 3‰ (single-ended) | |
| refresh rate | Maximum 70Hz | |
| Input Instructions | AI Green LED Indicator | |
| DO (relay) output | DO output type | Type A relay (normally open) |
| DO output mode | Level output, pulse output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (The total current supported by the same COM common terminal is up to 8A) | |
| Output Indicator | DO Green LED Indicator | |
| DO (PNP) output | DO output type | PNP type |
| DO output mode | Level output, pulse output | |
| Output capability | Supports output up to 0.5A per channel and 4A per COM port at voltages between 10 and 30V. | |
| Output Indicator | DO Green LED Indicator | |
| AO output | Output type | 0-20mA, 4-20mA / 0-5V, 0-10V (Voltage and current models are optional) |
| Output accuracy | 1‰ | |
| Output impedance | AOV: 40R AOI:656kΩ | |
| Output Indicator | AO Green LED indicator | |
| PT100 Input | Input type | 2/3 wire PT100 RTD |
| Temperature measurement range | -200～850℃ | |
| Temperature resolution | 0.1℃ | |
| accuracy | ±0.1%±1℃ | |
| refresh rate | Maximum 70Hz | |
| Input Instructions | RTD Green LED Indicator | |
| other | Product Dimensions | 110mm * 40mm * 100mm (Length * Width * Height) |
| Operating temperature and humidity | -40 to +85℃, 5% to 95%RH (non-condensing) | |
| Storage temperature and humidity | -40 to +105℃, 5% to 95%RH (non-condensing) | |
| Installation method | Positioning holes and guide rail installation | |