[Spécifications]：4 AI + 4 AO
[Interfaces]：LoRa, RJ45, RS485
[Tension]：DC 9-36 V
[Installation]：Rail de guidage + trou de positionnement
[Dimensions]：110 x 40 x 100 mm
[Poids du produit]：180 ± 5 g
[Introduction]：La série d'hôtes d'E/S distribués LoRa est un puissant module d'E/S distant sans fil pour le contrôle et l'acquisition de données à distance. Utilisant la technologie sans fil LoRa (avec module sans fil intégré), ce dispositif d'E/S distribués peut être contrôlé par l'envoi de commandes Modbus RTU via un port série ou un appareil distant connecté à LoRa. Il peut être utilisé avec la radio de transmission de données sans fil E90-DTU (900SL30) pour acquérir et contrôler sans fil les signaux d'entrée et de sortie numériques et analogiques (DI/DO/AI/AO). Le boîtier du produit est recouvert d'un revêtement conforme, offrant une résistance à la moisissure, à l'humidité et au brouillard salin.
Magasin officiel| category | name | parameter |
| power supply | Operating voltage | DC 9～36V |
| Power indicator | PWR red LED indicator | |
| Wireless parameters | M31-XXXXXXXXG-L operating frequency band | 410.125-493.125MHz |
| M31-XXXXXXXXG-L9 | 850.125～930.125MHz | |
| Transmit power | 30dBm (maximum power about 1W) | |
| Transmission distance | 10km (clear and open environment, maximum power, antenna gain 5 dBi, height 2m) | |
| M31-XXXXXXXXG-L channel | 23 (0-83 software configurable) | |
| M31-XXXXXXXXG-L9 channel | 18 (0-80 software configurable) | |
| airspeed | 2.4k-62.5k (6 airspeed options) | |
| Subcontractor Chief | 240Bytes | |
| Antenna Options | SMA antenna base (external screw and inner hole) | |
| communication | Communication interface | LoRa、RS485、RJ45 |
| Baud rate | 2400-230400 (8 baud rates optional) | |
| Communication Protocol | LoRa: Standard Modbus RTU protocol | |
| RS485: Standard Modbus RTU protocol | ||
| Ethernet: Standard Modbus TCP protocol | ||
| MODBUS | Device Address | Can be modified by software or hardware DIP switches |
| DI input | Input Type | NPN、PNP |
| Input voltage | 12~24V | |
| Input impedance | 7.2kΩ | |
| Acquisition frequency | Maximum 1K Hz | |
| Input Instructions | DI green LED indicator | |
| AI Input | Acquisition characteristics | Single-ended input/differential input (optional) |
| Input Type | Single-ended current: 0-20mA, 4-20mA | |
| Differential current: 0-20mA, 4-20mA, ±20mA | ||
| Differential voltage: 0-5V, ±5V, 0-10V, ±10V | ||
| AI Resolution | 16-bit (differential)/12-bit (single-ended) | |
| AI Precision | 1‰ (differential)/3‰ (single-ended) | |
| Acquisition frequency | Single-ended maximum 100Hz/differential maximum 40Hz | |
| Input Instructions | AI green LED indicator | |
| DO output | DO output type | Type A relay (normally open) |
| DO output mode | Level output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (the maximum total current supported by the same COM common terminal is 8A) | |
| Output Indicator | DO green LED indicator | |
| AO output | Output Type | 0-20mA、4-20mA |
| AO output accuracy | 3‰ | |
| Input Instructions | AO green LED indicator | |
| other | Product size | 110mm * 40mm * 100mm (length * width * height) |
| Working temperature and humidity | -40 ~ +85℃, 5% ~ 95%RH (non-condensing) | |
| Storage temperature and humidity | -40 ～ +105℃, 5% ～ 95% RH (non-condensing) | |
| Installation | Positioning holes and guide rail installation |