M31-GXXAX0080-U 8DO Module d'extension E/S distribuées hautes performances
[Spécifications]：8DO
[Interfaces de communication]：RJ45, RS485
[Tension de fonctionnement]：DC : 9~36 V
[Installation]： Montage sur rail DIN ou par perçage
[Dimensions]：110*25*100mm
[Poids]：135 ± 5 g
[Introduction]：Ce module d'extension E/S distribuées hautes performances nécessite l'utilisation de notre module E/S distantes distribuées hautes performances. Son boîtier est recouvert d'un revêtement protecteur contre les moisissures, l'humidité et les embruns salins.
Magasin officiel| category | name | parameter |
| DI Input | Input type | NPN、PNP |
| Input range | DC 10～28V | |
| Isolation methods | Each channel is individually opto-isolated. | |
| Input impedance | 7.2kΩ | |
| sampling frequency | 1000 Hz | |
| Counting frequency | ＜500Hz | |
| Filtering time | Default time 6ms | |
| Input Instructions | DI green LED indicator | |
| AI input | Acquisition characteristics | Differential input |
| Input type | Differential current: 0-20mA, 4-20mA, ±20mA | |
| AI resolution | 16-bit (differential) | |
| AI accuracy | 1‰ (difference) | |
| refresh rate | Differential maximum 70Hz | |
| Input Instructions | AI Green LED Indicator | |
| Relay-type DO output | DO output type | Type A relay (normally open) |
| DO output mode | Level output, pulse output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (maximum total current supported at the same COM common terminal is 8A) | |
| Output Indicator | DO green LED indicator | |
| Transistor-type DO output | DO output type | PNP type |
| DO output mode | Level output, pulse output | |
| Output capability | Supports output up to 0.5A per channel and 4A per COM port at voltages between 10 and 30V. | |
| Output Indicator | DO green LED indicator | |
| other | Product Dimensions | 110mm * 25mm * 100mm (Length * Width * Height) |
| Operating temperature and humidity | -40 to +85℃, 5% to 95%RH (non-condensing) | |
| Storage temperature and humidity | -40 to +105℃, 5% to 95%RH (non-condensing) | |
| Installation method | Positioning holes and guide rail installation |