[Spécifications]：8 DI
[Interfaces de communication]：RJ45, RS485
[Tension de fonctionnement]：DC 9～36V
[Installation]：Montage sur rail DIN ou par perçage
[Dimensions]：110*40*100mm
[Introduction]：Cet hôte d'E/S distribuées hautes performances prend en charge les protocoles Modbus TCP et Modbus RTU standard, et convient parfaitement à l'acquisition et au contrôle de données. Il est équipé de deux interfaces Ethernet adaptatives 10/100 Mbps et prend en charge la fonction de commutation. La vitesse du bus interne peut atteindre 1 ms. En cas de coupure réseau, une fonction de réinitialisation des sorties numériques et analogiques garantit la restauration de l'état initial. Le boîtier est recouvert d'une peinture triple couche offrant une protection contre les moisissures, l'humidité et les embruns salins.
Magasin officiel| category | name | Specifications |
| power supply | Operating voltage | DC 9～36V; with reverse polarity protection |
| Power indicator | PWR red LED indicator | |
| Power consumption | 2～4W | |
| communication | Communication interface | RJ45*2 (dual network ports), RS485 |
| baud rate | 9600bps (optional) | |
| Communication Protocol | Standard Modbus TCP, Modbus RTU protocols | |
| Internal bus | Up to 1ms | |
| Modbus | Device address | Modification can be achieved via Modbus commands, host computer, and hardware DIP switches. |
| DI Input | Input type | NPN、PNP |
| Input range | DC 10～28V | |
| Isolation methods | Each channel is individually opto-isolated. | |
| Input impedance | 7.2kΩ | |
| sampling frequency | 1000 Hz | |
| Counting frequency | ＜500Hz | |
| Filtering time | Default time 6ms | |
| Input Instructions | DI green LED indicator | |
| AI input | Acquisition characteristics | Differential input |
| Input type | Differential current: 0-20mA, 4-20mA, ±20mA | |
| AI resolution | 16-bit (differential) | |
| AI accuracy | 1‰ (difference) | |
| refresh rate | Differential maximum 70Hz | |
| Input Instructions | AI Green LED Indicator | |
| Relay-type DO output | DO output type | Type A relay (normally open) |
| DO output mode | Level output, pulse output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (maximum total current supported at the same COM common terminal is 8A) | |
| Output Indicator | DO green LED indicator | |
| Transistor-type DO output | DO output type | PNP type |
| DO output mode | Level output, pulse output | |
| Output capability | Supports output up to 0.5A per channel and 4A per COM port at voltages between 10 and 30V. | |
| other | Product Dimensions | 110mm * 40mm * 100mm (Length * Width * Height) |
| Operating temperature and humidity | -40 to +85℃, 5% to 95%RH (non-condensing) | |
| Storage temperature and humidity | -40 to +105℃, 5% to 95%RH (non-condensing) | |
| Installation method | Positioning holes and guide rail installation |