[Spécifications]：8DI+8DO
[Interfaces de communication]：2 ports RJ45
[Tension de fonctionnement]：DC 9 à 36 V
[Installation]：Montage sur rail DIN ou par perçage
[Dimensions]：110*40 *100 mm
[Poids]：205 ± 5 g
[Introduction]：Le module hôte d'E/S distribuées M31-U-CAT est un module esclave compatible avec le protocole EtherCAT. Sa structure modulaire permet une extension flexible en fonction des besoins. Ce module prend en charge plusieurs types d'E/S ; si la configuration existante s'avère insuffisante pour une application spécifique, il est facile d'ajouter des modules d'extension d'E/S compatibles sans remplacer l'ensemble du système, ce qui permet de réaliser des économies et de simplifier le déploiement sur site. Le boîtier est recouvert d'un revêtement protecteur assurant une protection contre les moisissures, l'humidité et les embruns salins.
Magasin officiel| EtherCAT distributed IO hosts | ||
| category | Name | Parameters |
| Power supply | Operating voltage | DC 9～36V； With anti-reverse connection protection |
| Power indication | RUN red LED indicator | |
| Power consumption | 2~4W | |
| Communication | Communication interface | RJ45*2 (dual network port). |
| Communication protocol | EtherCAT protocol | |
| Internal bus | Up to 1ms | |
| DI input | Input type | NPN、PNP |
| Enter the range | DC 10～28V | |
| Isolation method | Each channel is individually opto-isolated | |
| Input impedance | 7.2kΩ | |
| Acquisition frequency | 1000 Hz | |
| Count frequency | ＜500Hz | |
| Filter time | Default time 6ms | |
| Enter the instructions | DI green LED indicator | |
| AI input | Collection characteristics | Single-ended input/differential input (model optional). |
| Input type | Single-ended current: 0-20mA, 4-20mA | |
| 差分电流:0-20mA、4-20mA、±20mA | ||
| Differential voltage: 0-5V, ±5V, 0-10V, ±10V | ||
| Single-ended voltage: 0-5V, 0-10V | ||
| AI resolution | 16-bit (differential) | |
| AI precision | 1‰ (differential)/3‰ (single-ended). | |
| Refresh frequency | 70Hz max | |
| Enter the instructions | AI green LED indicator | |
| DO (relay) output | DO output type | Type A relay (normally open). |
| DO output mode | Level output, pulse output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (the sum of the common current of the same COM supports up to 8A). | |
| Output indication | DO green LED indicator | |
| DO (PNP) output | DO output type | PNP type |
| DO output mode | Level output, pulse output | |
| Output capability | It supports a maximum output of 0.5A per channel and a maximum output of 4A per COM port at a voltage of 10~30V | |
| Output indication | DO green LED indicator | |
| AO output | Output type | 0-20mA, 4-20mA/0-5V, 0-10V (voltage and current models are optional). |
| Output accuracy | 1‰ | |
| Output impedance | AOV: 40R AOI:656kΩ | |
| Output indication | AO green LED indicator | |
| Other | Product size | 110mm*40mm*100mm (L*W*H). |
| Operating temperature and humidity | -40 ~ +85°C, 5% ~ 95% RH (no condensation). | |
| Storage temperature and humidity | -40 ~ +105°C, 5% ~ 95%RH (no condensation). | |
| Installation method | Positioning holes, guide rail installation | |