[Spécifications]：4DI+4DO
[Interfaces de communication]： RJ45, RS485
[Tension de fonctionnement]：DC 9～36V
[Installation]： Montage sur rail DIN ou par trou de positionnement
[Dimensions]：110*40*100mm
[Introduction]：Ce contrôleur d'E/S distribuées hautes performances prend en charge les protocoles Modbus TCP et Modbus RTU standard, et convient parfaitement à l'acquisition et au contrôle de données. Il est équipé de deux interfaces Ethernet adaptatives 10/100 Mbps et prend en charge les fonctions de commutation. La vitesse du bus interne peut atteindre 1 ms. En cas d'interruption réseau, une fonction de réinitialisation des sorties numériques et analogiques assure leur restauration à un état prédéfini. Le boîtier est recouvert d'un revêtement de protection contre les moisissures, l'humidité et les embruns salins.
Magasin officiel| category | name | Specifications |
| power supply | Operating voltage | DC 9～36V; with reverse polarity protection |
| Power indicator | PWR red LED indicator | |
| Power consumption | 2～4W | |
| communication | Communication interface | RJ45*2 (dual network ports), RS485 |
| baud rate | 9600bps (optional) | |
| Communication Protocol | Standard Modbus TCP, Modbus RTU protocols | |
| Internal bus | Up to 1ms | |
| Modbus | Device address | Modification can be achieved via Modbus commands, host computer, and hardware DIP switches. |
| DI Input | Input type | NPN、PNP |
| Input range | DC 10～28V | |
| Isolation methods | Each channel is individually opto-isolated. | |
| Input impedance | 7.2kΩ | |
| sampling frequency | 1000 Hz | |
| Counting frequency | ＜500Hz | |
| Filtering time | Default time 6ms | |
| Input Instructions | DI green LED indicator | |
| AI input | Acquisition characteristics | Differential input |
| Input type | Differential current: 0-20mA, 4-20mA, ±20mA | |
| AI resolution | 16-bit (differential) | |
| AI accuracy | 1‰ (difference) | |
| refresh rate | Differential maximum 70Hz | |
| Input Instructions | AI Green LED Indicator | |
| Relay-type DO output | DO output type | Type A relay (normally open) |
| DO output mode | Level output, pulse output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (maximum total current supported at the same COM common terminal is 8A) | |
| Output Indicator | DO green LED indicator | |
| Transistor-type DO output | DO output type | PNP type |
| DO output mode | Level output, pulse output | |
| Output capability | Supports output up to 0.5A per channel and 4A per COM port at voltages between 10 and 30V. | |
| other | Product Dimensions | 110mm * 40mm * 100mm (Length * Width * Height) |
| Operating temperature and humidity | -40 to +85℃, 5% to 95%RH (non-condensing) | |
| Storage temperature and humidity | -40 to +105℃, 5% to 95%RH (non-condensing) | |
| Installation method | Positioning holes and guide rail installation |