[Spécifications]：4 (DI) + 4 (DO) + 4 (AI)
[Interface de communication]：RJ45, RS485
[Tension de fonctionnement]：DC 9～36V
[Installation]：trou de positionnement, installation sur rail de guidage
[Dimensions]：110 x 40 x 100 mm
[Introduction]：Cet hôte d'E/S distribuées hautes performances prend en charge les protocoles Modbus TCP et Modbus RTU standard et est adapté à l'acquisition et au contrôle de données. Il est équipé d'interfaces Ethernet doubles adaptatives 10/100 Mbit/s et prend en charge les fonctions de commutation. La vitesse du bus interne peut atteindre 1 ms. Il dispose de fonctions de commutation et de réinitialisation de la sortie analogique pour garantir son rétablissement à l'état prédéfini en cas d'interruption de la communication. La coque du produit est recouverte d'une peinture triple protection : anti-moisissure, anti-humidité et anti-buée saline.
Magasin officiel| category | name | parameter |
| power supply | Operating voltage | DC 9～36V; with reverse connection protection |
| Power indicator | PWR red LED indicator | |
| Power consumption | 2～4W | |
| communication | Communication interface | RJ45*2 (dual network ports), RS485 |
| Baud rate | 9600bps (optional) | |
| Communication Protocol | Standard Modbus TCP, Modbus RTU protocols | |
| Internal bus | Up to 1ms | |
| Modbus | Device Address | Can be modified through Modbus command, host computer and hardware dial |
| DI Input | Input Type | NPN、PNP |
| Input range | DC 12～24V | |
| Isolation method | Each channel is optically isolated | |
| Input Impedance | 7.2kΩ | |
| Collection frequency | 1000 Hz | |
| Counting frequency | ＜500Hz | |
| Filter time | Default time 6ms | |
| Input instructions | DI green LED indicator | |
| AI Input | Acquisition characteristics | Differential input |
| Input Type | Differential current: 0-20mA, 4-20mA, ±20mA | |
| AI Resolution | 16 bits (differential) | |
| AI Precision | 1‰(difference) | |
| Collection frequency | Differential maximum 70Hz | |
| Input instructions | AI green LED indicator | |
| DO Output | DO output type | Type A relay (normally open) |
| DO output mode | Level output, pulse output | |
| Relay contact capacity | 5A 30VDC, 5A 250VAC (the total current of the same COM common terminal supports a maximum of 8A) | |
| Output indication | DO green LED indicator | |
| other | Product size | 110mm * 40mm * 100mm (length * width * height) |
| Working temperature and humidity | -40 ～ +85℃, 5% ～ 95%RH (no condensation) | |
| Storage temperature and humidity | -40 ～ +105℃, 5% ～ 95%RH (no condensation) | |
| Installation | Positioning holes and guide rail installation |
| category | name | parameter |
| Basic parameters | Modbus Address | 1 |
| Baud rate | 9600bps | |
| Check digit | None | |
| Data bits | 8 | |
| Stop bits | 1 | |
| DI filter parameters | 6 | |
| AI Filter Parameters | 0 | |
| Network parameters | Working Mode | TCP server (up to 5 client connections) |
| DHCP | closure | |
| Gateway Address | 192.168.3.1 | |
| Subnet Mask | 255.255.255.0 | |
| Local IP | 192.168.3.7 | |
| Local port | 502 | |
| Target IP | 192.168.3.3 | |
| Destination Port | 502 | |
| DNS Server | 114.114.114.114 | |
| Local MAC | Determined by chip (fixed) |