[Interface de communication]：UART
[Tension de fonctionnement]：2,7-3,6 V
[Dimensions]：12,2 x 16 x 2,4 mm
[Poids]：0,9 ± 0,1 g
[Introduction]：Le module Beidou simple EWM108-GN06BS est basé sur la puce multifréquence simple Beidou AT9880B de nouvelle génération de Zhongkewei. Il prend en charge les signaux de fréquence B1I, B1C, B2I, B3I, B2a et B2b des systèmes Beidou-2 et Beidou-3. Il est utilisé dans des domaines d'application tels que les appareils portables, les téléphones portables, les objets connectés, les drones, la conduite intelligente, l'agriculture de précision, la mesure de précision et les équipements de communication électrique.
Official Store| Main parameters | performance | Remark | ||
| Minimum | Typical Value | Maximum | ||
| Operating voltage (V) | 2.7 | 3.3 | 3.6 | Over 3.6V may burn the module |
| Communication level (V) | 3.3 | Using 5V TTL may burn out | ||
| Operating temperature (°C) | -40 | - | 85 | Industrial-grade design |
| Storage temperature (℃) | -40 | - | 125 | |
| Humidity (%RH) | 5 | - | -95 | No condensation |
| Main parameters | describe | Remark | |
| Baud rate (bps) | 4800~460800 | Default 115200bps | |
| Data bits | 8bit | - | |
| Stop bits | 1 | - | |
| Communication interface | UART | - | |
| Packaging | SMD | - | |
| EWM108-GN06B Dimensions | 9.7*10.5*2.4mm | ±0.2mm | |
| EWM108-GN06BS Dimensions | 12.2*16.0*2.4mm | ||
| Antenna interface | Stamp Holes | - | |
| Communication Protocol | Support NMEA0183 V4.10 and previous versions | - | |
| Positioning update rate | 1Hz (default) | The maximum positioning update frequency can reach 20Hz | |
| Supported positioning systems | BDS | B1I, B1C, B2I, B3I, B2a, B2b | |
| Product Weight | EWM108-GN06B | 0.5g | ±0.1g |
| EWM108-GN06BS | 0.9g | ||
| category | Indicator | Typical Value | unit |
| Positioning time (Test condition 1) | Cold Start | ≤23 | s |
| Hot Start | ≤1 | s | |
| Recapture | ≤1 | s | |
| Sensitivity (Test condition 2) | Cold Start | -148 | dBm |
| Hot Start | -156 | dBm | |
| Recapture | -160 | dBm | |
| track | -162 | dBm | |
| Accuracy (Test condition 3) | Horizontal positioning accuracy (static) | ＜1.0 | m |
| Speed positioning accuracy | ＜0.05 | m/s | |
| Timing accuracy | 10 | ns | |
| Power consumption (Test condition 4) | EWM108-GN06B capture current | 41 | m.a. |
| EWM108-GN06BS capture current | 37 | ||
| EWM108-GN06B Tracking Current | 52 | m.a. | |
| EWM108-GN06BS Tracking Current | 48 | ||
| EWM108-GN06B sleep current | 48 | a | |
| EWM108-GN06BS Sleep Current | 49 |
[ Test condition 1] : The number of received satellites is greater than 6 , the signal strength of all satellites is -130dBm , the average value is taken after 10 tests , and the positioning error is less than 10 meters.
[ Test condition 2] : External LNA noise coefficient 0.8 , number of received satellites greater than 6 , received signal strength value under the condition of locking or not losing lock within 5 minutes.
[ Test condition 3] : Open and unobstructed environment, 24 hours of continuous power-on test, 50% CEP .
[ Test condition 4] : The number of received satellites is greater than 6 , and the signal strength of all satellites is -130dBm .