EWM104-BT13SP Module de commutateur de proximité Bluetooth BLE 5.0 Reconnexion automatique Bluetooth Prise en charge de l'applet ou de la configuration du port série
[Interface de communication]：UART
[Fréquence de fonctionnement]： 2,4 GHz
[Protocole Bluetooth]：BLE 5.0
[Distance de communication]：60 m
[Dimensions]：10 x 14,5 mm
[Poids]：0,5 ± 0,1 g
[Introduction]：La série EWM104-BT13 est un module de détection de proximité Bluetooth basé sur le protocole Bluetooth BLE5.0. Compact, il consomme peu d'énergie et fonctionne sur la bande de fréquence 2,4 GHz. Le module Bluetooth utilise des commandes AT courantes pour le paramétrage, et son fonctionnement est simple et rapide. Il peut être utilisé pour les serrures de portes et de voitures intelligentes, les maisons connectées, l'électronique grand public, le contrôle industriel et bien d'autres applications.
Magasin officiel
| Serial number | Pin Definition | Pin Direction | illustrate |
| 1 | GND | -- | Power Ground |
| 2 | PD6 | -- | Reserved GPIO, users do not need to worry about |
| 3 | PD7 | enter | Internal pull-up, falling edge, and then keep low level for at least 5 seconds, all parameters are restored to factory settings and the module is automatically restarted. |
| 4 | PA3 | -- | SWS; program download pin; users do not need to care; |
| 5 | PA7 | Output | Connection status indication pin, high level indicates connected, low level indicates disconnected |
| 6 | PB2 | enter | Battery voltage detection pin |
| 7 | RST | enter | Reset pin, low level reset |
| 8 | WKP | enter | Low level low power mode; High level enters working mode |
| 9 | RXD | enter | Serial port input |
| 10 | TXD | Output | Serial port output |
| 11 | GND | -- | |
| 12 | VBAT | -- | Positive power supply, 2.0V~4.2V, 3.3V power supply is recommended |
| 13 | PB7 | Output | The default is low level, and the effective level is high; There are two modes: long-acting and inching; can be set through the serial port or WeChat applet; the pulse width of the inching mode supports the configuration of 10~65535ms |
| 14 | PC0 | Output | The default is low level, and the effective level is high; There are two modes: long-acting and inching; can be set through the serial port or WeChat applet; the pulse width of the inching mode supports the configuration of 10~65535ms |
| 15 | PC1 | Output | Complementary PWM output; can be configured through the serial port or WeChat applet; long-term or electric mode, frequency, duty cycle, (dead time), PWM duration (10~65535ms in inching mode); |
| 16 | PD2 | Output | |
| 17 | PD1 | -- | Reserved GPIO, users do not need to worry about |
| 18 | GND | -- | Power Ground |