Home >Modem>Wireless modem>LoRa wirelss modem
EWD95M-433GF20(485) Radio de transmission de données à modulation GFSK Micro DTU sur rail DIN Méthodes de transmission multiples Performances à coût élevé Prise en charge de l'intercommunication avec le module E48

[Type d'interface]:RS485

[Puissance d'émission]:20 dBm

[Distance de communication]:3,5 km

[Taille du produit]:80*28*27mm

[Poids du produit]:32 ± 1 g

[Introduction]:EWD95M-433GF20(485) est une radio de transmission de données sans fil utilisant la technologie de modulation GFSK. Elle offre plusieurs modes de transmission et fonctionne dans la bande de fréquences (410 MHz à 450 MHz) (433 MHz par défaut). La coque adopte un revêtement à trois niveaux : antifongique, anti-humidité et anti-sel.Elle offre une interface RS485/RS232 transparente, un boîtier en plastique, une structure d'installation sur rail de guidage et une tension d'entrée large bande de 8 à 28 V (DC). La technologie de modulation GFSK permet de transmettre davantage de données dans des ressources spectrales limitées. Elle prend en charge le réveil radio, la configuration sans fil, la mise en réseau relais, les clés de communication et d'autres fonctions. Elle dispose également d'une fonction de cryptage des données. Grâce à des algorithmes de cryptage et de décryptage rigoureux, elle garantit la sécurité des données et améliore la fiabilité des communications et l'efficacité de la transmission.

PIN
Serial number name Function illustrate
1 PWR Power indicator Lights up when the power is on.
2 T/R Send/Receive Indicator The flashing light is red when sending data and green when receiving data.
3 FOR Mode indicator Working mode indicator light.
4 M1 Mode indicator Working mode indicator light.
5 Mode Mode switch button Working mode switching control.
6 A RS485 Signal A RS485 Signal A
7 B RS485 Signal B RS485 Signal B
8 - GND Negative power supply
9 + VCC Power positive (DC 8~28V)
10 ON RF Interface SMA-K, external threaded inner hole.


★Note: If communication is not smooth when the radio is connected to multiple devices, but not when connected to a single device, try connecting a 120Ω resistor in parallel between the 485_A terminal and the 485_B terminal.

★EWD95M-433GFXX can be powered by 8~28V (DC) power supply, and the wiring port is connected by terminal block.


Serial number name Function illustrate
1 PWR Power indicator Lights up when the power is on.
2 T/R Send/Receive Indicator The flashing light is red when sending data and green when receiving data.
3 FOR Mode indicator Working mode indicator light.
4 M1 Mode indicator Working mode indicator light.
5 Mode Mode switch button Working mode switching control.
6 T RS232 bus TX interface The RS232 interface TX interface is connected to the device RX interface
7 R RS232 bus RX interface The RS232 interface RX interface is connected to the device TX interface
8 - VCC Negative power supply
9 + GND Power positive (DC 8~28V)
10 ON RF Interface SMA-K, external threaded inner hole.


★EWD95M-2G4Hxx(xxx) can be powered by 8~28V (DC) power supply, and the wiring port is connected by terminal block.