Home >Module>Transmission Audio>Audio Sans Fil
EWD201-470A20(AUX) Voice Wireless Transmitter Broadcast-grade quality Max 2 km Long-distance audio signal transmission

[Fréquence]:470 MHz

[Puissance d’émission]: 20 dBm

[Portée]:2 km

[Dimensions]:68 * 63 *18 mm

[Introduction]:The EWD201-470A20(AUX) long-range wireless voice transceiver is a radio device that integrates voice transmission and reception. Utilizing long-range wireless transmission technology, it allows for voice input/output via a 3.5mm AUX interface. The transceiver employs a 16-bit/8kHz audio sampling rate, enabling voice-quality transmission. It supports one-to-many voice broadcasting, operates in the UHF band, and boasts a communication range of up to 2km in open environments, with strong anti-interference capabilities.

PIN
Serial Number label name illustrate
1 VOL+/- Volume knob The volume control knob: turn counterclockwise to decrease the volume, and clockwise to increase the volume.
2 USB 5V Power input USB Type-C interface, 5V/1A input
3 IN Voice input 3.5mm AUX input, compatible with microphones, computers, and other devices.
4 OUT Voice output 3.5mm AUX output, can be used to connect headphones or output to loudspeakers and other speaker devices driven by an amplifier.
5 RX/TX DIP switch Dial up for receive mode, dial down for transmit mode. Only one device is allowed to transmit broadcast voice at any given time on the same channel.
D1~D7 Dial up for 1, dial down for 0, resulting in 128 possible combinations. Communication is only possible when the settings on both the transmitting and receiving sides are consistent.
6 POWER Power indicator light Red, always on when powered.
7 STATE Status indicator lights Green light indicates it's on during communication and off at other times.
8 ON Antenna Interface Connect the matching antenna