[Interface de communication]：RS485
[Tension de fonctionnement]：DC 5~24V
[Système de positionnement]：BDS
[Dimensions]：103*28*28.5mm
[Introduction]：The EWD108-GN03B(485) satellite positioning terminal supports the BDS satellite positioning system and features fast response and accurate positioning. The device outputs positioning information via the Modbus RTU protocol, supporting the output of RMC-ASCII strings conforming to the NMEA0183 protocol and separate registers for storage (longitude, longitude direction, latitude, latitude direction, etc.). The serial port baud rate can reach up to 115200bps and can be easily modified via the Modbus RTU protocol. The product is coated with a conformal coating, providing anti-mildew, anti-moisture, and anti-salt spray functions.
Magasin officiel| Modem | Interface signal | Transmission | Network Protocol | Working voltage(V) | Installation | Sizemm | Feature | Manual | Muestra |
|---|---|---|---|---|---|---|---|---|---|
| EWD108-GN06B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS single Beidou satellite positioning terminal | ||
| EWD108-GN03B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN05(232) | RS232 RS485 | - | TCP/UDP, MQTT, HTTP | DC 5～36 | Positioning hole | 84*82*25 | European version high performance 4G DTU | ||
| EWD108-GN05(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN04(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN03(232) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS positioning module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| E108-GN02S | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole（SMT） | 16*12*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02 | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole (SMT surface mount) | 10.1*9.7*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02D | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 3-5.5 | 6P wiring seat, spacing 1.0mm | 22*20*5.8 | Low power consumption, multi-mode satellite positioning module |