[Interface de communication]：RS232
[Tension de fonctionnement]：DC 5~24V
[Système de positionnement]：BDS/GPS/GLONASS
[Protocole de communication]：Modbus RTU
[Taille du produit]：103*28*28,5 mm
[Introduction]：EWD108-GN03(232) Le module de positionnement GNSS multimode est un terminal de positionnement qui prend en charge plusieurs systèmes de positionnement (système de positionnement BDS/GPS/GLONASS). La coque adopte un revêtement à trois niveaux : antifongique, anti-humidité et anti-sel.L'appareil génère des informations de positionnement via le protocole Modbus RTU, prend en charge la sortie de chaînes RMC-ASCII conformes au protocole NMEA0183 et des registres séparés pour le stockage (longitude, direction de longitude, latitude, direction de latitude, etc.), et le débit en bauds du port série peut atteindre jusqu'à 115 200 bps, ce qui peut être facilement modifié via le protocole Modbus RTU, ce qui est pratique et rapide.
Magasin officiel| Serial number | project | Specification |
| 1 | Power supply voltage | 5V~24V DC |
| 2 | Communication interface | RS232 |
| 3 | Baud rate range | 1200-115200bps |
| 4 | Communication protocol | Modbus RTU |
| 5 | Supported positioning system | BDS/GPS/GLONASS |
| 6 | Working frequency band | BDS B1、GPS L1、GLONASS L1 |
| 7 | Positioning update rate | 1Hz~10Hz |
| 8 | User Configuration | Modbus RTU to modify the register, restart takes effect |
| 9 | Antenna interface | SMA (Official Threaded Inner Hole) |
| 10 | Hardware interface | 4Pin 3.81mm Phoenix Terminal |
| 11 | Size | 103×28×28.5mm（L×W×H） |
| 12 | Average weight | 32±5g |
| 13 | Operating temperature | -40℃ ~ +85℃, industrial grade |
| 14 | Working humidity | 10% ~ 90%, relative humidity, no condensation |
| category | Indicators | Typical values | unit |
| Positioning time (Test condition 1) | Cold start | ≤32 | S |
| Hot start | ≤1 | S | |
| Recapture | ≤1 | S | |
| Sensitivity (Test condition 2) | Cold start | -148 | dBm |
| Hot start | -156 | dBm | |
| Recapture | -160 | dBm | |
| track | -162 | dBm | |
| Accuracy (Test condition 3) | Horizontal positioning accuracy | ＜2.5 | m |
| Speed positioning accuracy | ＜0.1 | m/s | |
| Timing accuracy | 30 | ns | |
| Power consumption (Test condition 4) | Capture current | 30 | and |
| Tracking current | 20 | and | |
| Operating temperature | - | -40℃-85℃ | - |
| Storage temperature | - | -55℃-100℃ | - |
| humidity | - | 5%-95%RH (no condensation) | - |
Note: The above results are GPS/Beidou dual-mode working mode
[Testing
Condition 1]: The number of received satellites is greater than 6, the
signal intensity of all satellites is -130dBm, the average value is
taken after 10 tests, and the positioning error is less than 10 meters.
[Test
Condition 2]: The external LNA noise figure is 0.8, the number of
received satellites is greater than 6, and the received signal strength
value under locked or locked conditions is locked within five minutes.
[Test Condition 3]: Open and unobstructed environment, boot up for 24 consecutive hours, 50%CEP.
[Test Condition 4]: The number of received satellites is greater than 6, and the signal strength of all satellites is -130dBm.