ESP32-WROVER Modules sans fil WiFi + BT + BLE + MCU 802.11 b/g/n/e/i prix de la carte de développement esp32 Module bluetooth BLE4.2 2.4G
[IC]：ESP32
[Fréquence]：2.4GHz
[Pouvoir]：20dBm
[Interface]：UART/IO
[Poids du produit]：2.9±0.1g
[Introduction]：ESP32-WROVER est un puissant module universel wifi BT ble MCU pour une large gamme d'applications, des réseaux de capteurs de faible puissance aux tâches les plus exigeantes telles que le codage vocal, la diffusion de musique et le décodage MP3.
| Pin No. | Name | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | 3V3 | Power supply |
| 3 | EN | Chip-enable signal. Active high |
| 4 | SENSOR_VP | GPIO36, ADC1_CH0, RTC_GPIO0 |
| 5 | SENSOR_VN | GPIO39, ADC1_CH3, RTC_GPIO3 |
| 6 | IO34 | GPIO34, ADC1_CH6, RTC_GPIO4 |
| 7 | IO35 | GPIO35, ADC1_CH7, RTC_GPIO5 |
| 8 | IO32 | GPIO32， XTAL_32K_P(32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9 |
| 9 | IO33 | GPIO33， XTAL_32K_N(32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8 |
| 10 | IO25 | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 |
| 11 | IO26 | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 |
| 12 | IO27 | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV |
| 13 | IO14 | GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 |
| 14 | IO12 | GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 |
| 15 | GND | Ground |
| 16 | IO13 | GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3， SD_DATA3， EMAC_RX_ER |
| 17 | SHD/SD2* | GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD |
| 18 | SWP/SD3* | GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD |
| 19 | SCS/CMD* | GPIO11, SD_CMD, SPICS0, HS1_CMD, U1RTS |
| 20 | SCK/CLK* | GPIO6, SD_CLK, SPICLK, HS1_CLK, U1CTS |
| 21 | SDO/SD0* | GPIO7, SD_DATA0, SPIQ, HS1_DATA0, U2RTS |
| 22 | SDI/SD1* | GPIO8, SD_DATA1, SPID, HS1_DATA1, U2CTS |
| 23 | IO15 | GPIO15, ADC2_CH3, TOUCHC3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 |
| 24 | IO2 | GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 |
| 25 | IO0 | GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK |
| 26 | IO4 | GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER |
| 27 | NC1 | - |
| 28 | NC2 | - |
| 29 | IO5 | GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK |
| 30 | IO18 | GPIO18, VSPICLK, HS1_DATA7 |
| 31 | IO19 | GPIO19, VSPIQ, U0CTS, EMAC_TXD0 |
| 32 | NC | - |
| 33 | IO21 | GPIO21, VSPIHD, EMAC_TX_EN |
| 34 | RXD0 | GPIO3, U0RXD, CLK_OUT2 |
| 35 | TXD0 | GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 |
| 36 | IO22 | GPIO22, VSPIWP, U0RTS, EMAC_TXD1 |
| 37 | IO23 | GPIO23, VSPID, HS1_STROBE |
| 38 | GND | Ground |