EID091-A701-SC Kit de test de module CANFD
[Conversion de protocole]：CANFD vers TTL
[Tension]：DC 4.5～5.5V
[Dimensions]：56 * 23 mm
[Introduction]：Le kit de test d'évaluation EID091-A701-SC est destiné au module de port série CANFD vers TTL modèle EID091-A701-S. Il prend en charge les protocoles CANFD ISO et Bosch et est compatible avec les normes CAN 2.0 A/B. Il dispose d'une broche d'activation 485 et propose cinq modes de fonctionnement.
Magasin officiel
| Interface serial number | name | Remark |
| 1 | RX2 | Not open to users |
| 2 | TX2 | Not open to users |
| 3 | RST | Reset pin: low level triggered |
| 4 | CFG | Hardware enters configuration mode: low level enters configuration mode, high level exits. |
| 5 | RESTORE | Factory reset: Low level for 5 seconds to reset factory settings. |
| 6 | TX1 | Not open to users |
| 7 | RX1 | Not open to users |
| 8 | GND | Land supply |
| 9 | GND | Land supply |
| 10 | BOOT | Not open to users |
| 11 | PART | Not open to users |
| 12 | CLK | Not open to users |
| 13 | SET | Data pins: The CAN bus has data pins that output a low level. |
| 14 | IN | 485 Enable Pin: Connects to the enable pin of the RS485 chip. |
| 15 | SOUP | CANFD bus pin: CANFD high |
| 16 | LIVE | CANFD bus pin: CANFD low |