ECK30-T13IC1E8-I Ordinateur embarqué T113-i 1 Go de mémoire, basé sur le processeur économique Allwinner
[Modèle de processeur]：T113-i
[Fréquence du processeur]： 1,2 GHz
[Mémoire]：1 GB
[Stockage]： 8 GB
[Dimensions]：46 x 36 x 5,3 mm
[Poids du produit]： 10 ± 1 g
[Introduction]：La carte mère ECK30-T13IC d'Ebyte est conçue avec soin à partir du processeur T113-i d'Allwinner. Dotée d'un connecteur BTB, cette carte mère intégrée de qualité industrielle, fabriquée en Chine, offre un faible coût, une faible consommation d'énergie, un excellent rapport qualité-prix et une grande fiabilité. Elle est largement utilisée dans le contrôle industriel, les IHM, l'IoT et d'autres domaines
Magasin officiel| Function | quantity | Functional Description |
| CPU | 1 | T113-i；Dual-core ARM Cortex-A7@1.2GHz； RISC-V CPU；HiFi4 DSP； |
| MEM | 1 | On-board DDR3 SDRAM, 16-bit width, 256MB/512MB/1GB optional; |
| FLASH | 1 | On-board 8GB eMMC / on-board 256MB SPINAND FLASH optional; |
| DISPLAY | 1 | Parallel RGB 24-bit color output, supporting up to 1920×1080@60fps; Dual-channel LVDS output, supporting up to 1920×1080@60fps; |
| 4-lane MIPI DSI, supporting up to 1920×1200@60fps; | ||
| Note: The above display interface I/O is multiplexed and cannot be used simultaneously; Serial RGB output, supports up to 800×480@60fps; | ||
| CSI | 1 | 8-bit parallel digital camera interface, supports 1080P@30fps, maximum 148.5MHz pixel clock; |
| CVBS IN | 2 | 1 CVBS decoder, supporting NTSC and PAL formats, 10-bit video ADC; |
| CVBS OUT | 1 | Supports NTSC and PAL formats, 10-bit video DAC; |
| Audio Codec | 1 | 2-channel DAC, sampling rate 8KHz~192KHz; |
| 3-channel ADC, sampling rate 8KHz~48KHz; | ||
| 3 MIC IN, 1 LINE IN, 1 FM IN; | ||
| 1 differential LINE OUT, 1 headphone OUT; | ||
| MAC | 1 | Support RMII/RGMII interface (10/100/1000Mbps); |
| SMHC | 2 | Support SD3.0, SDIO3.0, MMC5.0 protocols; |
| SDC0: 4-bit data bus (recommended as baseboard Micro SD function); | ||
| SDC1: 4-bit data bus; | ||
| Note: SDC2 is not brought out to the BTB connector and is used to connect the eMMC or FLASH storage chip on the board; | ||
| USB DRD | 1 | Comply with USB2.0 standard, support USB HOST and USB Device functions; |
| USB HOST | 1 | Comply with USB2.0 standard and support USB HOS function; |
| TWI(I2C) | 4 | Support standard mode (100Kbps) and high-speed mode (400Kbps); |
| SPI | 1 | Supports SPI mode and DBI (Display Bus Interface) mode; supports Master Mode, Slave Mode, 1 chip select signal; supports up to 100MHz operating frequency; |
| UART | 6 | Maximum baud rate of 4Mbps (64MHz APB clock), supporting hardware or software flow control; |
| PWM | 8 | 0~100% adjustable duty cycle, supports output and input capture, output frequency is 0~24MHz or 100MHz; |
| GPADC | 2 | 12-bit SAR type A/D converter with sampling frequency up to 1MHz; |
| TPADC | 4 | 12-bit SAR type A/D converter, sampling frequency up to 1MHz, supports 4-wire resistive touch screen; |
| LRADC | 1 | 6-bit A/D converter, sampling frequency up to 2KHz, supports hold key and general key; |
| LEDC | 1 | Supports 1024 LED serial connections, LED data transmission rate up to 800Kbps; |
| PCM/I2S | 3 | Support full duplex, sampling rate 8KHz~384KHz; |