Home >Informatique Industrielle>Module SBC>Série ECB30
ECB32-PBA4-N Ordinateur monocarte Allwinner A527, mémoire 4 Go, carte TF externe, interfaces riches, support technique Linux, double port caméra MIPI CSI, compatible avec l'interface Raspberry Pi PCle

[Modèle de processeur]:A527

[Fréquence du processeur]:1,8 GHz

[Mémoire]:4 GB LPDDR4

[Stockage]:Carte TF externe

[Dimensions]:85 x 56 mm

[Poids]: 45 g

[Introduction]:Les ordinateurs monocartes (SBC) de la série ECB32-PB sont soigneusement conçus à partir des processeurs Allwinner A527. Ils prennent en charge les interfaces vidéo MIPI DSI, MIPI CSI pour caméra, HDMI, PCIe, USB Host, USB OTG, Ethernet, audio, extension de carte TF, Wi-Fi et Bluetooth, port série de débogage UART et un large éventail d'interfaces GPIO étendues. Ils sont largement utilisés dans les terminaux de partage de contenu et en libre-service, la fabrication intelligente et autres équipements électroniques commerciaux et industriels.

Power input

1 Type-C interface, 5V input, shared with USB Device;

HDMI

1 MicroHDMI display interface, with a maximum resolution supporting 4K@60fps 2D display and 4K@30fps 3D display;

MIPI DSI

1-way 26-pin 4-lane MIPI DSI display interface, supporting a maximum resolution of 1920 x 1200@60fps;

MIPI CSI

2-way 22-pin 4-lane MIPI CSI camera interface, each lane supports 2.0Gbit/s transmission speed;

MINI PCIe

1 PCIE2.1x1 lane, 5Gbps/lane;

USB HOST

4-way USB2.0 HOST;

USB Device

1 USB Device, sharing the Type-C interface with the power supply;

Wi-Fi & BT

1 Wi-Fi, supporting IEEE 802.11b/g/n; 1 Bluetooth 4.2, sharing the same antenna with Wi-Fi

Network port

1 10/100/1000M adaptive RJ45 Ethernet port;

TF card

1 TF card slot, supports plug-in detection;

Audio

1-way 3.5MM audio interface, supports headphone output and microphone input;

debug

1 UART debug serial port;

FAN

1 radiator fan interface, 5V power supply, supports PWM speed regulation;

GPIO

1 set of 2.54mm 2x20Pin standard RPI expansion interface, multiplexing 2 I2C, 1 I2S, 1 SPI, 5 UART, 2 CAN;

button

1 RESET button; 1 PWRON button; 1 FEL button;

indicator light

1 dual-color indicator light, red for power indicator and green for operation indicator;

Watchdog

Support on-chip watchdog function;

RTC

1 x 1.25mm 2Pin RTC battery holder;