ECB10-PGD-I Ordinateur monocarte hautes performances et économique (256/512 Mo de mémoire) ; nombreuses interfaces d'E/S ; compatible Linux
[Modèle de processeur]：STM32MP13xDAF7
[Fréquence du processeur]：1 GHz
[Capacité mémoire]：256/512 MB
[Capacité de stockage]：8 GHz
[Dimensions]：100 × 72 mm
[Poids du produit]：58 ± 5 g
[Introduction]：La carte ECB10-PGD est basée sur la carte mère ECK10-135D, dotée de connecteurs plaqués or 204 broches pour une installation et un retrait simplifiés. Sa conception exploite pleinement les interfaces de la carte mère, offrant un accès à des fonctionnalités telles qu'une interface d'affichage RGB888, l'USB 2.0, l'USB OTG, un lecteur de cartes TF, une interface de débogage, une interface Ethernet, des interfaces audio et une large gamme d'interfaces GPIO d'extension.
Magasin officiel
| Pin number | Pin Definitions | MCU I/O | Function Description |
| 1 | LCD_RST | PG12 | Screen display reset |
| 2 | TP_INT | PD8 | Touch interruption |
| 3 | TP_SCL | PF2 | Touch I2C clock signal, with 2.2K pull-up. |
| 4 | NC | / | / |
| 5 | TP_SDA | PF1 | Touch I2C data signal, with 2.2K pull-up. |
| 6 | TP_RST | PG8 | Touch reset |
| 7 | LCD_PWM | PD12 | Screen backlight adjustment |
| 8 | LCD_DE | PH9 | Data enable signal |
| 9 | LCD_VSYNC | PG4 | Frame synchronization signal |
| 10 | LCD_HSYNC | PE9 | Horizontal synchronization signal |
| 11 | LCD_CLK | PD9 | Pixel clock signal |
| 12 | GND | / | power ground |
| 13 | LCD_B7 | PE15 | Blue signal B7 |
| 14 | LCD_B6 | PB6 | Blue signal B6 |
| 15 | LCD_B5 | PD15 | Blue signal B5 |
| 16 | LCD_B4 | PH3 | Blue signal B4 |
| 17 | LCD_B3 | PF8 | Blue signal B3 |
| 18 | LCD_B2 | PH7 | Blue signal B2 |
| 19 | LCD_B1 | PE13 | Blue signal B1 |
| 20 | LCD_B0 | PD5 | Blue signal B0 |
| 21 | GND | / | power ground |
| 22 | LCD_G7 | PE4 | Green signal G7 |
| 23 | LCD_G6 | PE12 | Green signal G6 |
| 24 | LCD_G5 | PD10 | Green signal G5 |
| 25 | LCD_G4 | PD13 | Green signal G4 |
| 26 | LCD_G3 | PF3 | Green signal G3 |
| 27 | LCD_G2 | PD1 | Green signal G2 |
| 28 | LCD_G1 | PH2 | Green signal G1 |
| 29 | LCD_G0 | PE14 | Green signal G0 |
| 30 | GND | / | power ground |
| 31 | LCD_R7 | PD11 | Red signal R7 |
| 32 | LCD_R6 | PH8 | Red signal R6 |
| 33 | LCD_R5 | PE7 | Red signal R5 |
| 34 | LCD_R4 | _PD14 | Red signal R4 |
| 35 | LCD_R3 | PB12 | Red signal R3 |
| 36 | LCD_R2 | PG7 | Red signal R2 |
| 37 | LCD_R1 | PD4 | Red signal R1 |
| 38 | LCD_R0 | PA15 | Red signal R0 |
| 39 | VDD_5V | / | 5V power supply |
| 40 | VDD_5V | / | 5V power supply |
Raspberry Pi Expansion Interface Pin Definition Table
| Pin number | Pin Definitions | Pin number | Pin Definitions |
| 1 | 3V3 | 2 | 5V |
| 3 | PD7/I2C3_SDA | 4 | 5V |
| 5 | PH12/I2C3_SCL | 6 | GND |
| 7 | GPIO_PF14 | 8 | PE1/UART8_TX |
| 9 | GND | 10 | PF9/UART8_RX |
| 11 | PE8/UART7_TX | 12 | GPIO_PD0 |
| 13 | PE10/UART7_RX | 14 | GND |
| 15 | GPIO_PF10 | 16 | PG0/CAN2_TX |
| 17 | 3V3 | 18 | PE0/CAN2_RX |
| 19 | PH10/SPI2_MOSI | 20 | GND |
| 21 | PB5/SPI2_MISO | 22 | GPIO_PD6 |
| 23 | PB10/SPI2_SCK | 24 | PB13/SPI2_NSS |
| 25 | GND | 26 | GPIO_PG15 |
| 27 | PB8/I2C4_SDA | 28 | PE2/I2C4_SCL |
| 29 | PG10/CAN1_TX | 30 | GND |
| 31 | PG9/CAN1_RX | 32 | PE11/PWM1 |
| 33 | PF13/PWM2 | 34 | GND |
| 35 | GPIO_PF5 | 36 | GPIO_PF12 |
| 37 | PI12 | 38 | GPIO_PF15 |
| 39 | GND | 40 | GPIO_PH4 |