[Modèle de processeur]：STM32MP135AAF3
[Fréquence du processeur]： 650 MHz
[Capacité mémoire]：512 MB
[Tension de fonctionnement]：DC 12 V
[Taille du produit]：100*72mm
[Introduction]：L'Ebyte ECB10-135A5M5M-I est un ordinateur monocarte 2,5 pouces compact, économique et très fiable, soigneusement conçu sur la base de la carte mère ECK10-135A5M5M-I lancée par Ebyte. Il offre une variété d'interfaces périphériques et de capacités d'extension telles que 2 ports USB, 1 port Gigabit Ethernet, 1 port HDMI et 1 port audio. Il convient à une utilisation par lots dans l'automatisation industrielle, les villes intelligentes, les terminaux d'affichage et de contrôle et d'autres scénarios.
Magasin officiel| Power input | 12V 1A DC input | |
| processor | STM32MP135AAF3；Single Arm Cortex-A7 core，650MHz； | |
| storage | Memory | DDR3L SDRAM, 16 bits wide, 512MB; |
| FLASH | 512MB parallel NAND FLASH; | |
| show | 1 channel 40Pin FPC parallel display interface, the maximum resolution supports WXGA (1366×768@60fps), RGB888 parallel display output, supports touch screen; 1 channel HDMI 2.0 interface, the maximum resolution supports WXGA; | |
| USB HOST | 4-way USB2.0 HOST, including 2 UIO expansion ports; | |
| USB OTG | 1 channel USB OTG, Type-C interface type; | |
| Network port | 1 channel 10/100/1000M adaptive RJ45 Ethernet port; | |
| WiFi&BT | 1 channel 2.4G WiFi, 1 channel Bluetooth, sharing 1 IPX interface; | |
| TF | 1 TF card slot, supports plug and pull detection; | |
| Audio | 1 channel 3.5mm audio output (green), 1 channel 3.5mm microphone input (red); | |
| debug | 1 channel UART TTL debugging serial port, 2.54mm pin; | |
| CAN | 1 CAN-FD interface, led out from the UIO expansion port; | |
| GPIO | 4 channels of GPIO, UIO expansion port lead out; | |
| serial port | 1 channel RS485/422/232 multi-protocol serial port, select the communication mode through a jumper cap, RS485 communication rate is 10Mbps, RS232 communication rate is 250kbps; RS485 and RS232 support flow control, and UIO expansion port leads out; 1 channel UART communication serial port, supports flow control, UIO expansion port leads out; | |
| I2C | 2 channels of I2C, UIO expansion port lead out; | |
| button | 1 reset button, side button, and UIO expansion port; 1 power button, lead out from UIO expansion port; | |
| indicator light | 1 power indicator light; 1 running indicator light; 1 user light; | |
| watchdog | Support on-chip watchdog function | |
| RTC | 1 channel 1.25mm RTC battery holder; | |
| BOOT | 1-way boot selection dialing, supports booting from FLASH, OTG, and TF cards; | |
| Power output | 2 channels of 5V 1A power output, lead out from the UIO expansion port; 2 channels of 3.3V 1A power output, lead out from UIO expansion port; | |