[Type d'interface]:RS232/RS485
[Fréquence de travail]: 433,125 M
[Distance de communication]:70 km
[Taille du produit]:160*137*44mm
[Poids du produit]:846,2 g ± 5
[Introduction]:E90-DTU (400SL47) est une radio de transmission de données sans fil de qualité industrielle de très haute qualité. La radio utilise la technologie à spectre étalé LORA et sa forte capacité anti-interférence permet d'utiliser les communications sans fil dans les sites industriels. La coque adopte un revêtement à trois niveaux : antifongique, anti-humidité et anti-sel.Plus stable et fiable. Il dispose d'une variété de méthodes de transmission et fonctionne dans la bande de fréquences (410,125 ~ 460,125 M). La station radio fournit une interface RS232/RS485 transparente. La radio dispose d'une fonction de cryptage des données. Les données transmises par la radio dans les airs sont aléatoires. Grâce à des algorithmes stricts de cryptage et de décryptage, l’interception des données n’a aucun sens. Il prend en charge le réglage de la longueur des paquets et prend en charge différentes propriétés et paquets de données en temps réel.
| Pin number | Name | Function | Description |
| 1 | PE | Connect with the earth | Connect with the earth |
| 2 | GND | Pressed wire power input negative pole | Power reference ground |
| 3 | VCC | Pressed line power input positive pole | Power input (12V/20A) |
| 4 | MOD | Mode control | Floating, normal mode; grounded, configuration mode |
| 5 | RS485G | RS485 interface G | RS485 interface G is connected to the GND interface of the device (recommended connection) |
| 6 | RS485B | RS485 interface B | RS485 interface B is connected to device B interface |
| 7 | RS485A | RS485 interface A | RS485 interface A is connected to device A interface |
| 8 | RS232 | RS232 interface | Standard RS232 interface |
| 9 | ANT | SMA-K interface | Externally threaded inner hole, length 10mm, characteristic impedance 50Ω |
| 10 | PWR | Power Indicator | Red, lights up when power is on |
| 11 | TXD | Serial data sending indicator light | Yellow, flashing when sending data |
| 12 | RXD | Serial port data receiving indicator light | Yellow, flashes when receiving data |
| 13 | ERR | warning light | Red, the antenna is not connected or the voltage or temperature is abnormal. After the abnormality of the unconnected antenna is resolved, it needs to be powered on again to work normally. |