E870-L868LG12-S Passerelle LoRaWAN multicanal de qualité industrielle, semi-duplex, équipée de la puce SX1302, compatible avec les fréquences EU868, RU864 et IN865.
[Interface de communication]：Ethernet/WiFi STA
[Fréquence]：863-870 MHz
[Tension de fonctionnement]：DC 8～28V
[Portée]：3 km
[Dimensions]：101,6 × 30 × 63 mm
[Poids]：132,2 ± 5 g
[Introduction]：La passerelle LoRaWAN E870-L868LG12-S, compacte et montée sur rail DIN, a été développée par Chengdu Ebate Electronics Technology Co., Ltd. Alimentée par une large plage de tensions continues (8 à 28 V), elle prend en charge les protocoles Ethernet et WiFi STA et est compatible avec les codes régionaux EU868, RU864 et IN865. Son boîtier, recouvert d'un revêtement protecteur, la préserve des moisissures, de l'humidité et des embruns salins.
Magasin officiel
| Interface serial number | name | Remark |
| 1 | WIFI antenna | WIFI antenna (SMA interface) |
| 2 | 4G antenna | 4G antenna (SMA interface), supported only by 4G version devices. |
| 3 | LoRa antenna | LoRa antenna (SMA interface) |
| 4 | PWR | Power indicator light (red) - Solid on: Normal; Off: Abnormal |
| 5 | SYS | Operation indicator light (blue) - Solid light: Normal; Off light: Abnormal |
| 6 | NET | Network indicator light (green) - ETH network access: solid light; WIFI STA network access: slow flash (on for 500ms, off for 500ms); 4G network access: fast flash (on for 100ms, off for 100ms); No network AP operating: very slow flash (on for 2000ms, off for 2000ms); All network interfaces not operating normally: NET light off. |
| 7 | LINK | Connection indicator light (green) - stays on when connected to the server. |
| 8 | TXD | Data transmission indicator (yellow) - flashing when data is being transmitted. |
| 9 | RXD | Data reception indicator (yellow) - flashing when data is being received. |
| 10 | VAN | WAN port, 10/100Mbps |
| 11 | SIM card slot | Only 4G version devices are supported |
| 12 | Reload | The reset and factory reset buttons are used. A short press resets the device, while a long press for 3-10 seconds restores factory settings. Pressing and holding the power button forces the WiFi to switch to AP mode. |
| 13 | DC-IN- | Power supply range: DC 8~28V, negative terminal |
| 14 | DC-IN+ | Power supply range: DC 8~28V, positive terminal |