Ebyte uart ttl et module de conversion bidirectionnelle can-bus ttl vers can bus interface converier module support pour Modbus RTU
[Interface]：UART
[Caractéristique]：UART TTL to CAN-BUS
[Poids du produit]：2.25g
[Introduction]：E810-TTL-CAN01 est un produit CAN-BUS économique doté de puissantes capacités d'analyse de données. Le module de conversion de protocole intelligent est compact et facile à installer. C'est un assistant fiable pour les applications d'ingénierie, le débogage de projets et le développement de produits.
| No. | Item | Direction | Application |
|---|---|---|---|
| 1 | CANH | CAN high | CAN high |
| 2 | CANL | CAN low | CAN low |
| 3 | GND | Ground | Ground |
| 4 | TXD | UART transmit | Module transmits UART data |
| 5 | RXD | UART receive | Module receives UART data |
| 6~12 | NC | - | - |
| 13 | GND | Ground | Ground |
| 14 | VCC | Power input | Power input，5V or 3.3V is recommended |
| 15 | GND | Ground | Ground |
| 16 | RESET | Reset pin | The module with low level input enters the hardware reset state, and the module with high level input returns to the normal working state. This function is used for reset operation in an emergency. |
| 17 | CFG | Hardware parameter setting pin | For parameter setting，it should be connected with GND in short circuit. |
| 18 | Restore | Restore default | For restoring, it should be connected with GND in short circuit for 5S. Only valid when reset or power on again. |
| 19~20 | NC | - | - |
| 21 | STE | State indicator | When there is data transfer, the STE pin is low level |
| 22~25 | NC | - | - |
| 26 | RTS | Hardware control flow pin | Hardware control flow pin RTS |
| 27 | CTS | Hardware control flow pin | Hardware control flow pin CTS |
| 28 | GND | Ground | Ground |