[IC]:CC2652P
[La fréquence]:2.400~2.480 GHz
[Du pouvoir]:20 dBm
[Distance]:700 m
[Taille]:28.7*17.5 mm
[Poids du produit]:1.9±0.1 g
[Introduction]:E72-2G4M20S1E est un module système sur puce sans fil SMD 2,4 GHz multiprotocole développé indépendamment par TI sur la base du CC2652P produit par TI. La puissance de transmission est de 20 dBm. Microcontrôleur ARM intégré et émetteur-récepteur sans fil haute performance. Firmware ZigBee3.0 intégré, veuillez consulter la page Link72 pour plus de détails.
| Main Parameters | Min. | Max. | Remarks |
|---|---|---|---|
| Power supply (V) | 0 | 3.8 | Voltage over 3.8V will cause permanent damage to module |
| Blocking power (dBm) | - | 10 | Chances of burn is slim when modules are used in shortdistance |
| Operating temperature (℃) | -40 | +85 | Industrial grade |
| Main Parameters | Min. | Typ. | Max. | Remarks |
|---|---|---|---|---|
| Operating voltage (V) | 1.9 | 3.3 | 3.8 | ≥3.3V ensures output power |
| Communication level (V) | - | 3.3 | - | For 5V TTL, it may be at risk of burning down |
| Operating temperature (℃) | -40 | - | 85 | Industrial design |
| Operating frequency (MHz) | 2400 | - | 2480 | - |
| TX Current (mA) | - | 106 | - | Instantaneous power consumption @20dBm |
| RX current (mA) | - | 7.3 | - | - |
| Max Tx power (dBm) | 19 | 19.5 | 20 | - |
| Receiving sensitivity (dBm) | - | -105 | - | Bluetooth 125-kbps (LE Coded PHY) |
| Main parameter | Description | Remarks |
|---|---|---|
| Reference distance | 700m | Test condition: clear and open area, antenna gain: 5 dBi, antenna height: 2 m, air data rate: 150 kbps |
| Crystal frequency | 48MHz/32.768k | High speed 48MHz/low speed 32.768k |
| Protocol | Bluetooth 5 Low Energy Zigbee Thread | - |
| Package | SMD | - |
| Interface | 1.27mm | Stamp hole |
| IC | CC2652P1FRGZ | - |
| FLASH | 352KB | - |
| RAM | 80KB | - |
| Core | Arm® Cortex®-M4F | - |
| Size | 28.7*17.5mm | - |
| Antenna | PCB on-board antenna | 50 ohm impedance |
| Weight | 1.9±0.1g | - |