[Solution de puce]:CC1312R
[Bande de fréquence de travail]: 410 ~ 490 MHz
[Puissance d'émission]:14dBm
[Distance de communication]:1,5 km
[Taille du produit]:16*26mm
[Poids du produit]:2.5g±0.1g
[Introduction]:
E70-400M14S1B adopte la puce RF CC1312R importée à l'origine de Texas Instruments (TI), qui intègre un micro-ordinateur à puce unique et un émetteur-récepteur sans fil, et adopte un oscillateur à cristal de dérive à basse température de haute précision de qualité industrielle de 48 MHz pour assurer ses caractéristiques industrielles et ses performances stables. Le module sans fil est un module SOC purement matériel, il n'y a pas de programme en usine et l'utilisateur doit effectuer un développement secondaire avant de pouvoir l'utiliser.
| Serial number | Pin | Pin direction | Remark |
| 1 | GND | reference | Module ground wire |
| 2 | ANT | - | Antenna (50Ω characteristic impedance) |
| 3 | X32K_Q1 | input Output | 32.768K quartz crystal oscillator connected with pin 4 |
| 4 | X32K_Q2 | input Output | 32.768K quartz crystal connected with pin 3 |
| 5 | DIO_1 | input Output | MCU GPIO |
| 6 | DIO_2 | input Output | MCU GPIO |
| 7 | DIO_3 | input Output | MCU GPIO |
| 8 | DIO_4 | input Output | MCU GPIO |
| 9 | DIO_5 | input Output | MCU GPIO |
| 10 | DIO_6 | input Output | MCU GPIO |
| 11 | DIO_7 | input Output | MCU GPIO |
| 12 | DIO_8 | input Output | MCU GPIO |
| 13 | DIO_9 | input Output | MCU GPIO |
| 14 | DIO_10 | input Output | MCU GPIO |
| 15 | DIO_11 | input Output | MCU GPIO |
| 16 | GND | reference | Module ground wire |
| 17 | DIO_12 | input Output | MCU GPIO |
| 18 | DIO_13 | input Output | MCU GPIO |
| 19 | DIO_14 | input Output | MCU GPIO |
| 20 | DIO_15 | input Output | MCU GPIO |
| 21 | TMSC | enter | JTAG TMSC |
| 22 | TCKC | enter | JTAG TCKC |
| 23 | DIO_16 | input Output | MCU GPIO |
| 24 | DIO_17 | input Output | MCU GPIO |
| 25 | DIO_18 | input Output | MCU GPIO |
| 26 | VCC | - | Positive reference of module power supply, voltage range: 2.2~3.8V DC |
| 27 | GND | reference | Module ground wire |
| 28 | DIO_19 | input Output | MCU GPIO |
| 29 | DIO_20 | input Output | MCU GPIO |
| 30 | DIO_21 | input Output | MCU GPIO |
| 31 | DIO_22 | input Output | MCU GPIO |
| 32 | RESET | enter | Module reset pin |
| 33 | DIO_23 | input Output | MCU GPIO |
| 34 | DIO_24 | input Output | MCU GPIO |
| 35 | DIO_25 | input Output | MCU GPIO |
| 36 | DIO_26 | input Output | MCU GPIO |
| 37 | DIO_27 | input Output | MCU GPIO |
| 38 | DIO_28 | input Output | MCU GPIO |
| 39 | DIO_29 | input Output | MCU GPIO |
| 40 | DIO_30 | input Output | MCU GPIO |
| 41 | GND | reference | Module ground wire |
| 42 | GND | reference | Module ground wire |