[Type d'interface]：UART/PHY
[Portée]：1 km
[Size]：35*35 mm
[Poids]： 6,8 ± 0,2 g
[Introduction]：Le module E611-900NW20D d'EBITE est un module de transmission d'images et de données longue distance. Offrant un débit de 16 Mbit/s, il permet la transmission simultanée de quatre flux vidéo 1080p. Il assure également une transmission transparente simultanée via Ethernet et ports série, fonctionnant dans la bande de fréquences 850-930 MHz avec une puissance d'émission maximale de 20 dBm. Grâce à ses commandes AT universelles, son utilisation est simple et rapide. Ce module trouve de nombreuses applications dans la domotique, la sécurité résidentielle, la surveillance à distance d'équipements, la robotique, les transports intelligents, les appareils domotiques, le pilotage de vols sans fil, l'automobile, l'Internet industriel, l'acquisition et le contrôle intelligents de données, les villes intelligentes, la diffusion en direct en extérieur, et bien d'autres domaines.
Magasin officiel
| Serial Number | name | Pin functions and electrical parameters | Remark |
| 1 | Antenna Interface | IPEX-1 Generation | - |
| 2 | Mode switch button | Master/slave mode switch button | - |
| 3 | Pairing button | Master-slave pairing button | Set the master DIP switch to master and the slave DIP switch to slave. Press the pairing buttons on both the master and slave devices simultaneously until the RSS1~3 and CON lights are constantly lit, indicating successful pairing. |
| 4 | PHY0 | Network port indicator light | The Activity light is flashing: This indicates that data packets are being transmitted and the connection is active. |
| PHY1 | Network port indicator light | A solid Link light indicates that the network port has been successfully connected to the network and the device is working properly. | |
| RSS3 | RSSI signal strength indication I/O | Active low | |
| RSS2 | RSSI signal strength indication I/O | Active low | |
| RSS1 | RSSI signal strength indication I/O | Active low | |
| WITH | Pairing indicator light will illuminate when pairing is successful. | - | |
| 5 | WITH | Pairing indicator light, external indicator light can be connected. | - |
| RS-1 | RSSI signal strength indication I/O | Active low, can be connected to an external indicator light. | |
| RS-2 | RSSI signal strength indication I/O | Active low, can be connected to an external indicator light. | |
| RS-3 | RSSI signal strength indication I/O | Active low, can be connected to an external indicator light. | |
| 3V3 | The internal voltage of the connection module is 3.3V, which is not a concern for the user. | External indicator light power output positive | |
| GND | power ground | External indicator light power output GND | |
| 6 | 3V3 | The internal voltage of the connection module is 3.3V, which is not a concern for the user. | Serial interface Fixed baud rate 115200 Power pin not in use |
| RX | RXD Receive pin, TTL level | ||
| TX | TXD is the transmit pin, TTL level. | ||
| GND | power ground | ||
| 7 | RX- | Receive Data - | Ethernet interface |
| RX+ | Receive Data+ | ||
| TX- | Transceiver Data - (Send Data) | ||
| TX+ | Transceiver Data+ (Send Data+) | ||
| 8 | 12V | The module is externally powered and supports 5-12V. | Module power input positive |
| GND | power ground | Module power input ground | |
| KEY | Configured buttons, can be connected externally | Pairing function button interface, if no lead is required | |
| GND | power ground | Alternatively, the pairing button on the module board can be used. |