E32-433T20D Module lora sans fil EBTYE OEM/ODM 433Mhz UART
[La fréquence]：410~441MHz
[Du pouvoir]：19~20dBm
[Distance]：3.0km
[Interface]：UART
[Poids du produit]：6.3±0.1g
[Introduction]：E32-433T20D est un module de port série sans fil basé sur la solution LoRa de SEMTECH, mode de transmission transparent, fonctionnant dans la bande de fréquence 410-441 MHz (433 MHz par défaut) et utilisant la technologie à spectre étalé LoRa.
Magasin officiel
| Pin No. | Pin Item | Pin Direction | Pin Application |
|---|---|---|---|
| 1 | M0 | input (very weak pull-up) | cooperates with M1 to determine the 4 working modes of the module. (Cannot be left floating, can be grounded if not used) |
| 2 | M1 | input (very weak pull-up) | cooperates with M0 to determine the 4 working modes of the module. (Cannot be left floating, can be grounded if not used) |
| 3 | RXD | input | TTL serial input, connect to external TXD output pin; Can be configured as open-drain or pull-up input, see parameter settings for details. |
| 4 | TXD | output | TTL serial output, connect to external RXD input pin;Can be configured as open-drain or push-pull output, see parameter settings for details. |
| 5 | AUX | outputs | Used to indicate the working status of the module; (can be left floating)The user wakes up the external MCU, and outputs a low level during the power-on self-test initialization;It can be configured as open-drain output or push-pull output, see parameter settings for details. |
| 6 | VCC | input | Positive reference of module power supply, voltage range: 2.3～5.5V DC |
| 7 | GND | Input | Module ground wire |
| 8 | Fixing | holes Fixing holes | |
| 9 | Fixing | hole Fixing hole | |
| 10 | Fixing | hole Fixing hole | |