E290-400M33S(3029) Module 433/470 MHz sans licence globale (ISM) Solution de puce PAN3029 Émetteur-récepteur sans fil longue distance à faible consommation d'énergie
[Solution de puce]：PAN3029
[Fréquence de fonctionnement]： 410-510 MHz
[Puissance d’émission]：33 dBm
[Distance de communication]：16 km
[Dimensions]：24 x 38,5 mm
[Poids]： 5,1 ± 0,02 g
[Introduction]：Le module sans fil ChirpIoT™ E290-400M33S (3029) est un module sans fil hautes performances à montage en surface ChirpIoT™, basé sur la puce RF PAN3029 de nouvelle génération de Panchi Micro. Il est compatible avec les bandes de fréquences 433 MHz et 470 MHz. Utilisant la dernière technologie de modulation ChirpIoT™, il offre des performances anti-interférences supérieures et une portée de communication bien supérieure aux méthodes de modulation FSK et GFSK existantes.
Magasin officiel
| Pin number | Pin Name | Pin direction | Pin Purpose |
| 1 | GND | Ground wire, connected to the power reference ground | |
| 2 | GND | Ground wire, connected to the power reference ground | |
| 3 | GND | Ground wire, connected to the power reference ground | |
| 4 | GND | Ground wire, connected to the power reference ground | |
| 5 | GND | Ground wire, connected to the power reference ground | |
| 6 | NC | - | - |
| 7 | NC | - | - |
| 8 | GPIO11 | - | The user can leave it unconnected, no function is defined yet |
| 9 | VCC | - | Power supply, range 2.5～5.5V (it is recommended to add external ceramic filter capacitor) |
| 10 | VCC | - | Power supply, range 2.5～5.5V (it is recommended to add external ceramic filter capacitor) |
| 11 | GND | - | Ground wire, connected to the power reference ground |
| 12 | GND | - | Ground wire, connected to the power reference ground |
| 13 | IRQ | Input/Output | Configurable general IO ports |
| 14 | BUSY | Output | For status indication |
| 15 | NRST | input | Chip reset trigger input pin, low level is valid |
| 16 | MISO | Output | SPI data output pin |
| 17 | MONEY | input | SPI data input pin |
| 18 | SCK | input | SPI clock input pin |
| 19 | NSS | input | Module chip select pin, used to start an SPI communication |
| 20 | GND | - | Ground wire, connected to the power reference ground |
| 21 | ON | - | Antenna interface, stamp hole (50Ω characteristic impedance). |
| 22 | GND | - | Ground wire, connected to the power reference ground |