[IC]:SX1281
[La fréquence]:2.4~2.5GHz
[La puissance]:12.5dBm
[La distance]:3.0km
[Interface]:SPI
[Le poids]:1.6±0.1g
[Introduction]:Le module E28-2G4M12SX est un module émetteur-récepteur radiofréquence 2,4 GHz conçu et produit par la société Ebyte. Il présente une longue distance de communication et une consommation de courant extrêmement faible en mode faible consommation d'énergie. Ce module est un type de puce de petite taille (pas de broche 1,27 mm). Cette série utilise un oscillateur à cristal actif à dérive basse température de haute précision de qualité industrielle de 52 MHz pour garantir ses caractéristiques industrielles et ses performances stables.
| No. | Pin item | Pin direction | Application |
| 1 | VCC | - | Power supply.1.8V~3.6V(recommend to add external ceramic filter capacitor) |
| 2 | GND | - | Ground,connecting to power source reference ground |
| 3 | MISO_TX | Output | SPI data output pin,can be used as UART transmitting pin |
| 4 | MOSI_RX | Input | SPI data input pin,can be used as UART receiving pin |
| 5 | SCK_RTSN | Input | SPI clock input pin,can be used as UART request transmitting pin |
| 6 | NSS_CTS | Input | Module selection pin, used to start a SPI chip communication; and can be used as UART clearing transmitting pin |
| 7 | GND | - | Ground,connecting to power source reference ground |
| 8 | GND | - | Ground,connecting to power source reference ground |
| 9 | NRESET | Input | Chip reset initiation input pin,valid under low level,built-in 50k pull-up resistor |
| 10 | BUSY | Output | Status indication(refer to SX1281 Datasheet) |