E22P-868M30S Module émetteur-récepteur RF SX1262 868 MHz, oscillateur à quartz actif haute précision 32 MHz à compensation de température
[Solution de puce]：SX1262
[Fréquence]： 868 MHz
[Puissance d’émission]： 30 dBm
[Distance de communication]：12 km
[Dimensions]：38,5 x 24 mm
[Poids]： 5,1 ± 0,1 g
[Introduction]：Les modules de la série E22P-868M30S sont des modules sans fil LoRa™ à montage en surface, développés indépendamment à partir de la puce RF hautes performances SX1262 de Semtech. Ils fonctionnent dans la bande de fréquences 863,3-873,3 MHz et utilisent un oscillateur à quartz actif à compensation thermique de haute précision et de qualité industrielle. L'ajout d'un module frontal RF (RF FEM) améliore les performances anti-interférences et la portée de communication, creusant ainsi l'écart avec les produits utilisant les méthodes de modulation FSK et GFSK.
Magasin officiel
| Pin number | Pin Name | Pin direction | Pin Purpose |
| 1 | GND | Ground wire, connected to the power reference ground | |
| 2 | GND | Ground wire, connected to the power reference ground | |
| 3 | GND | Ground wire, connected to the power reference ground | |
| 4 | GND | Ground wire, connected to the power reference ground | |
| 5 | GND | Ground wire, connected to the power reference ground | |
| 6 | IN | input | RF enable control pin, connected to external MCU IO, high level is valid |
| 7 | T/R CTRL | Input/Output | RF transmission and reception control pins, high level for transmission, low level for reception, connected to external microcontroller IO or DIO2 |
| 8 | DIO2 | Input/Output | Configurable general IO port (see SX1262 manual for details) |
| 9 | VCC | Power supply, range 3.3 ~ 5.5V (it is recommended to add external ceramic filter capacitor) | |
| 10 | VCC | Power supply, range 3.3 ~ 5.5V (it is recommended to add external ceramic filter capacitor) | |
| 11 | GND | Ground wire, connected to the power reference ground | |
| 12 | GND | Ground wire, connected to the power reference ground | |
| 13 | DIO1 | Input/Output | Configurable general IO port (see SX1262 manual for details) |
| 14 | BUSY | Output | Used for status indication (see SX1262 manual for details) |
| 15 | NRST | input | Chip reset trigger input pin, low level is valid |
| 16 | MISO | Output | SPI data output pin |
| 17 | MONEY | input | SPI data input pin |
| 18 | SCK | input | SPI clock input pin |
| 19 | NSS | input | Module chip select pin, used to start an SPI communication |
| 20 | GND | Ground wire, connected to the power reference ground | |
| 21 | ON | Antenna interface, stamp hole (50Ω characteristic impedance) | |
| 22 | GND | Ground wire, connected to the power reference ground |