[Introduction]:Utilisé pour tester et développer le module sans fil Chengdu Ebyte E180-2G4Z20SX. E180-2G4Z20SX-TB a été pré-soudé à E180-2G4Z20SX. Les utilisateurs peuvent accéder eux-mêmes à l'alimentation externe et au port série. Fonctionne de manière stable et est facile à développer. Il adopte une conception d'en-tête de broche d'espacement de 2,0 mm, ce qui est pratique pour le développement et l'utilisation. Compatible avec la plinthe de la série XBEE 3 ZigBee3.0. Veuillez vous référer au manuel du module pour une utilisation détaillée.
| Pin number | Pin definition | Pin direction | Pin usage |
| 1 | VDD | input | Supports 1.9-3.8V power supply, ≥3.3V can guarantee output power |
| 2 | PB1 | output | Serial port output pin, TXD |
| 3 | PB0 | input | Serial port receiving pin, RXD |
| 4 | PA1 | input /output | General GPIO port |
| 5 | NRT | input | Reset pin, active low |
| 6 | PA0 | input /output | General GPIO port |
| 7 | PD3 | input /output | General GPIO port |
| 8 | NC | NC | - |
| 9 | PD4 | input | Wake-up pin, internal pull-up, pull low level to wake up the dormant terminal |
| 10 | GND | power ground | power ground |
| 11 | PC0 | input /output | General GPIO port |
| 12 | PC1 | input /output | General GPIO port |
| 13 | PA2 | output | Device status indication pin, high level means the module is in wake-up state, low level means sleep state. |
| 14 | NC | NC | - |
| 15 | PC3 | output | Network access indication pin, outputting high level means the module is not connected to the network; outputting high level at 2Hz frequency means the module has connected to the network (router); outputting high level at 1Hz frequency means the module has connected to the network (coordinator); outputting low level means that the module has connected to the network (coordinator) The module is in sleep state. |
| 16 | PC2 | input /output | General GPIO port |
| 17 | NC | NC | - |
| 18 | NC | NC | - |
| 19 | PC4 | input /output | General GPIO port |
| 20 | PC5 | input /output | General GPIO port |