[Portée]：0.28km
[Mode de montage]：Surface mount/stamp hole
[Dimensions]： 20.3*13.3*3mm
[Introduction]：Le E160-RxFS2 est un module récepteur sans fil programmable à modulation OOK/ASK (315 MHz/433,92 MHz) doté de 4 sorties. Il intègre une puce haute performance offrant une excellente résistance aux interférences. Ses 4 ports de sortie et 1 port d'entrée (paramètres) permettent des fonctions telles que le défilement, l'inversion et le verrouillage. Compatible avec diverses puces d'encodage, notamment PT2262, PT2260, SC2260, SC1527, EV1527, RT1527, HS1527 et EV527, il prend en charge l'apprentissage de jusqu'à 40 télécommandes. Compact, performant, doté d'une large plage de tension et d'une grande compatibilité, il est certifié FCC et CE. Il convient parfaitement aux applications de commande simples, comme les télécommandes pour petits appareils électroménagers, jouets, systèmes de contrôle d'accès et vélos électriques.
Magasin officiel| RF parameters | Parameter value | Remark |
| Operating frequency (MHz) | 315/433.92 | E160-R3FS2(315MHz)/E160-R4FS2(443.92MHz) |
| Modulation method | ASK/OOK | Amplitude keying/on/off keying |
| Blocking power (dBm) | 10 | - |
| Maximum transmit power (dBm) | - | The receiving module does not have this parameter. |
| Receiver sensitivity (dBm) | -115 | @315MHz/433.92MHz |
| Receive bandwidth (dBc) | ±300 | - |
| Transmission rate (kbps) | 10 | This specifically refers to the rate supported by the radio frequency unit, not the actual transmission rate of the module. |
| Frequency offset (MHz) | ±0.05 | - |
| Antenna impedance (Ω) | 50 | - |
| Reference communication distance (m) | 280 | In a clear, open environment, the transmitting power is 12 dBm, the spring antenna gain is 1.5 dBi, and the height is 2 m. |
| Electrical parameters | Minimum value | Typical value | Maximum value | Remark |
| Operating voltage (V) | 2 | - | 5.5 | ≥5.0V ensures optimal performance. |
| Communication level (V) | 2 | - | 5.5 | Based on the power supply voltage |
| Emitting current (mA) | - | - | - | The receiver module has no transmit current. |
| Received current (mA) | 4.3 | - | 5.1 | Within the rated power supply range |
| Dormant current (μA) | - | - | - | Normal receiving state, which is equal to the received current. |
| Startup time (ms) | - | 3 | - | The time it takes for the module to enter normal working state after power-on. |
| ESD protection (KV) | -8 | 8 | ESD HBM electrostatic discharge human body model | |
| Operating temperature (°C) | -40 | - | 85 | Industrial-grade design |
| Operating humidity (%rh) | 10 | - | 90 | - |
| Storage temperature (°C) | -55 | - | 125 | - |
| Hardware parameters | Parameter value | Remark |
| Crystal oscillator frequency (MHz) | 4.897 | E160-R3FS2(315MHz) |
| 6.7458 | E160-R4FS2(443.92MHz) | |
| Module dimensions (mm) | 20.4*11.3*3.0 | Length * Width * Height |
| Antenna type | stamp perforation | - |
| Communication interface | GPIO | Based on the supplied voltage |
| Packaging method | Perforated/stamp hole | The pin pitch is 2.54mm. Detailed dimensional information can be found in Chapter 3. |
| Weight (g) | 3.85 | - |