Home >Module>4G/NB/GPRS/GNSS/CAN>GNSS
E108-GN03G-232 BDS/GPS/GLONASS Module de positionnement et de navigation par satellite multimode GNSS

[Solution de puce]:AT6558R

[Interface de communication]:RS232

[Tension de fonctionnement]: 2,7-5,5 V

[Système de positionnement]:BDS/GPS/GLONASS

[Taille du produit]: 50,4*38,4*17,0 mm

[Introduction]:Le module E108-GN03G-232 est un module de positionnement et de navigation par satellite multimode hautes performances, hautement intégré, basse consommation et économique, doté d'une interface RS232. La coque adopte un revêtement à trois niveaux : antifongique, anti-humidité et anti-sel. Basé sur la solution AT6558R, il peut être utilisé dans les applications de positionnement et de navigation GNSS telles que la navigation automobile, les objets connectés et les drones. Compatible avec les protocoles BDS/GPS/GLONASS, il est compact et consomme peu d'énergie. Il offre des interfaces logicielles et matérielles compatibles avec celles d'autres fabricants de modules afin de réduire le cycle de développement utilisateur. Il prend en charge plusieurs modes de connexion à d'autres périphériques, tels que les interfaces I2C et SPI, personnalisables.

Main parameters performance Remark
minimum value Typical value maximum value
Working voltage (V) 2.7 5.0 5.6 Exceeding 5.5V may burn the module
Communication level (V)
3.3
Using 5V TTL risks burning out
Working temperature (℃) -40 - 85 Industrial grade design
humidity 5% - -95%RH No condensatio
Main parameters describe Remark
Baud rate (bps) 4800~115200 Default 9600
data bits 8bit -
Stop bit 1 -
Communication interface RS232 -
Product size 50.2*38.4*17.0mm ±0.2mm
Antenna interface ceramic antenna -
Communication protocol Support NMEA0183 V4.10 and previous versions -
Location update rate 1Hz The maximum positioning update frequency can reach 10Hz
Supported positioning systems BDS/GPS/GLONASS BDS B1、GPS L1、GLONASS L1
Product weight 65.2g ±0.5g
category Indicator items Typical value unit
Positioning time (test condition 1) cold start ≤32 s
hot start ≤1 s
recapture ≤1 s
Sensitivity (test condition 2) cold start -148 dBm
hot start -156 dBm
recapture -160 dBm
track -162 dBm
Accuracy (test condition 3) Horizontal positioning accuracy <2.5 m
Speed positioning accuracy <0.1 m/s
Timing accuracy 30 ns
Power consumption (test condition 4) E108-GN03 capture current 25 mA
E108-GN03S capture current 26
E108-GN03D capture  current
twenty four
E108-GN03G-TTL capture current
25
E108-GN03G-485 capture current
29
E108-GN03G-232 capture current
30
E108-GN03 tracking current 25 mA
E108-GN03S tracking current 26
E108-GN03D tracking current
twenty four
E108-GN03G-TTL tracking current
25
E108-GN03G-485 tracking current
29
E108-GN03G-232 tracking current
30
E108-GN03 sleep current 64 uA
E108-GN03S sleep current 57
E108-GN03D sleep current 0.3

Note: The above results are for GPS/Beidou dual-mode working mode.

[Test condition 1]: The number of receiving satellites is greater than 6, the signal strength of all satellites is -130dBm, the average value is taken after 10 tests, and the positioning error is less than 10 meters.

[Test condition 2]: External LNA noise coefficient is 0.8, the number of receiving satellites is greater than 6, and the received signal strength value is locked within five minutes or without losing lock.

[Test Condition 3]: Open and unobstructed environment, 24 hours of continuous power-on test, 50% CEP.

[Test Condition 4]: The number of receiving satellites is greater than 6, and the signal strength of all satellites is -130dBm.