[Solution de puce]：AT6558R
[Interface de communication]：UART/GPIO
[Tension de fonctionnement]： 2,7-3,6 V
[Taille du produit]：9,7 * 10,5 * 2,4 mm
[Introduction]：La série E108-GN03 est un module de positionnement et de navigation par satellite multimode hautes performances, hautement intégré, à faible consommation d'énergie et à faible coût basé sur la solution AT6558R, prenant en charge BDS/GNSS/GLONASS, avec une petite taille et une faible consommation d'énergie. Il peut être utilisé dans les applications de positionnement GNSS telles que la navigation de véhicules, les appareils portables intelligents et les drones, et fournit des interfaces logicielles et matérielles compatibles avec d'autres fabricants de modules, réduisant considérablement le cycle de développement de l'utilisateur. Il prend également en charge plusieurs façons de se connecter à d'autres périphériques, prend en charge les interfaces UART et GPIO, et si vous avez besoin d'interfaces I2C et SPI, veuillez contacter le service client pour la personnalisation.
Magasin officiel| Main parameters | Performance | Remark | ||
| Minimum value | Typical value | Maximum value | ||
| Working voltage (V) | 2.7 | 3.3 | 3.6 | Exceeding 3.6V may burn the module |
| Communication level (V) | 3.3 | Using 5V TTL risks burning out | ||
| Working temperature (℃) | -40 | - | 85 | Industrial grade design |
| humidity | 5% | - | -95%RH | No condensation |
| Main parameters | Describe | Remark |
| Baud rate (bps) | 4800~115200 | Default 9600 |
| data bits | 8bit | - |
| Stop bit | 1 | - |
| Communication interface | UART | - |
| Packaging method | SMD type | - |
| Product size | 9.7*10.5*2.4mm | ±0.2mm |
| Antenna interface | stamp hole | - |
| Communication protocol | Support NMEA0183 V4.1 and previous versions | - |
| Location update rate | 1Hz | The maximum positioning update frequency can reach 10Hz |
| Supported positioning systems | BDS/GPS/GLONASS | BDS B1、GPS L1、GLONASS L1 |
| Product weight | 0.5 | ±0.1g |
| Category | Indicator items | Typical value | Unit |
| Positioning time (test condition 1) | cold start | ≤32 | s |
| hot start | ≤1 | s | |
| recapture | ≤1 | s | |
| Sensitivity (test condition 2) | cold start | -148 | dBm |
| hot start | -156 | dBm | |
| recapture | -160 | dBm | |
| track | -162 | dBm | |
| Accuracy (test condition 3) | Horizontal positioning accuracy | <2.5 | m |
| Speed positioning accuracy | <0.1 | m/s | |
| Timing accuracy | 30 | ns | |
| Power consumption (test condition 4) | E108-GN03 capture current | 25 | mA |
| E108-GN03S capture current | 26 | ||
| E108-GN03D capture current | twenty four | ||
| E108-GN03 tracking current | 25 | mA | |
| E108-GN03S tracking current | 26 | ||
| E108-GN03D tracking current | twenty four | ||
| E108-GN03 sleep current | 64 | uA | |
| E108-GN03S sleep current | 57 | ||
| E108-GN03D sleep current | 0.3 |
Note: The above results are for GPS/Beidou dual-mode working mode.
[Test
condition 1]: The number of receiving satellites is greater than 6, the
signal strength of all satellites is -130dBm, the average value is
taken after 10 tests, and the positioning error is less than 10 meters.
[Test
condition 2]: External LNA noise coefficient is 0.8, the number of
receiving satellites is greater than 6, and the received signal strength
value is locked within five minutes or without losing lock.
[Test Condition 3]: Open and unobstructed environment, 24 hours of continuous power-on test, 50% CEP.
[Test Condition 4]: The number of receiving satellites is greater than 6, and the signal strength of all satellites is -130dBm.