E108-GN02S Nouveau Module de fiche technique de puce GSM/GPRS + GNSS multimode sans fil Simcom d'origine
[Protocole]：NMEA0183 V4.1 et version précédente, la fréquence de mise à jour maximale est de 10 Hz
[Certificat]：En attente
[Forfait]：Demi-trou (SMT)
[Poids du produit]：0.8±0.1g
[Introduction]：E108-GN02S est une puce de positionnement et de navigation par satellite multimode hautement intégrée, à faible consommation et à faible coût. Il peut être utilisé pour les applications de positionnement GNSS telles que la navigation automobile, les appareils portables intelligents et les drones. Il fournit également des interfaces logicielles et matérielles compatibles avec d'autres fabricants de modules, ce qui réduit considérablement le cycle de développement de l'utilisateur.
Magasin officiel| Modem | Interface signal | Transmission | Network Protocol | Working voltage(V) | Installation | Sizemm | Feature | Manual | Muestra |
|---|---|---|---|---|---|---|---|---|---|
| EWD108-GN06B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS single Beidou satellite positioning terminal | ||
| EWD108-GN03B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN05(232) | RS232 RS485 | - | TCP/UDP, MQTT, HTTP | DC 5～36 | Positioning hole | 84*82*25 | European version high performance 4G DTU | ||
| EWD108-GN05(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN04(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN03(232) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS positioning module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| E108-GN02S | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole（SMT） | 16*12*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02 | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole (SMT surface mount) | 10.1*9.7*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02D | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 3-5.5 | 6P wiring seat, spacing 1.0mm | 22*20*5.8 | Low power consumption, multi-mode satellite positioning module |