Module de Navigation de positionnement par Satellite GPS/GNSS I2C GPIO Module sans fil GNSS pour la Navigation de voiture Smart Wear Drone UAV
[Protocole]：Prend en charge NMEA0183 v4.1 et les versions antérieures, la fréquence de mise à jour fixe maximale peut atteindre 10Hz
[Certificat]：En attente
[Forfait]：Demi-trou (montage en surface SMT)
[Poids du produit]：0.5±0.1g
[Introduction]：E108-GN02 est un module de positionnement et de navigation par satellite multimode avec des performances élevées, une intégration élevée, une faible consommation d'énergie et un faible coût, qui peut être utilisé dans les applications de positionnement GPS/GNSS telles que la navigation de véhicules, l'usure intelligente, les drones, etc.
| Modem | Interface signal | Transmission | Network Protocol | Working voltage(V) | Installation | Sizemm | Feature | Manual | Muestra |
|---|---|---|---|---|---|---|---|---|---|
| EWD108-GN06B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS single Beidou satellite positioning terminal | ||
| EWD108-GN03B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN05(232) | RS232 RS485 | - | TCP/UDP, MQTT, HTTP | DC 5～36 | Positioning hole | 84*82*25 | European version high performance 4G DTU | ||
| EWD108-GN05(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN04(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN03(232) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS positioning module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| E108-GN02S | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole（SMT） | 16*12*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02 | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole (SMT surface mount) | 10.1*9.7*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02D | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 3-5.5 | 6P wiring seat, spacing 1.0mm | 22*20*5.8 | Low power consumption, multi-mode satellite positioning module |