[Interface de communication]：UART
[Protocole de communication]： SLE 1.0/WiFi 6/BLE 5.4
[Puissance d'émission]：20 dBm
[Conditionnement]：Montage en surface/Trou de fixation
[Dimensions]：16*11,5 mm
[Poids du produit]：0,65 g
[Introduction]：Le E105-WBS36SP est un module SoC 2,4 GHz hautement intégré, combinant WiFi 6, BLE 5.4 et SLE 1.0. Ce module de transfert série se caractérise par sa petite taille, ses nombreuses ressources, sa puissance et sa vitesse de transmission élevées, ainsi que sa forte résistance aux interférences. Grâce à son jeu de commandes AT universel, la commutation de mode et la configuration des paramètres sont simples et rapides. Ce module trouve de nombreuses applications dans les objets connectés, la domotique, la sécurité domestique, la santé personnelle, l'électroménager intelligent, les accessoires et télécommandes, l'automobile, l'éclairage, l'Internet industriel, l'acquisition et le contrôle intelligents de données, et bien d'autres domaines.
Magasin officiel| RF performance | Minimum value | Typical value | Maximum value | unit | Test conditions |
| Operating frequency band | 2400 | - | 2500 | MHz | Frequency points below 2401MHz and above 2483.5MHz cannot meet the radiation requirements of the Radio Regulatory Commission, and the selection of channel frequencies must comply with protocol and regulatory requirements. |
| WiFi RX Sensitivity | - | -71 | -70 | dBm | @11ax HE20 MCS9，LDPC 4×3.2us PER 10%,4096 octet PSDU |
| WiFi RX Adjacent Channel Rejection Ratio | - | 10 | - | dB | @11n HT40 MCS7, useful signal -58dBm, PER 10%, 4096 octets PPDU |
| WiFi TX maximum transmit power | 15 | - | 20 | dBm | @11ax HE20，LDPC 4x3.2us |
| WiFi reference communication distance | - | 260 | - | m | In a clear, open, unobstructed environment, the onboard PCB antenna has a gain of 0.5 dBi, a height of 1.2 m, and a transmit power of 20 dBm. |
| BLE RX Sensitivity | - | -96 | -95 | dBm | @BLE 2M，PER<30% |
| BLE TX maximum transmit power | - | 20 | - | dBm | @Meets EVM and ACP requirements |
| BLE Reference Communication Distance | - | 650 | - | m | In a clear, open, unobstructed environment, the onboard PCB antenna has a gain of 0.5 dBi, a height of 1.2 m, and a transmit power of 20 dBm. |
| SLE RX Sensitivity | - | -93 | -91 | dBm | @SLE 4M GFSK, PER<10% |
| SLE TX maximum transmit power | - | 20 | - | dBm | @SLE 4M GFSK, meets EVM and ACP requirements. |
| SLE Reference Communication Distance | - | 650 | - | m | In a clear, open, unobstructed environment, the onboard PCB antenna has a gain of 0.5 dBi, a height of 1.2 m, and a transmit power of 20 dBm. |
| Electrical performance | Minimum value | Typical value | Maximum value | unit | Remark |
| Operating voltage | 3 | 3.3 | 3.6 | In | Output power can be guaranteed with a voltage of ≥3.3V; exceeding 3.6V carries a risk of burnout. |
| Communication level | - | 3.3 | - | In | Using 5V TTL levels carries a risk of damage; please use level conversion circuits appropriately. |
| WiFi TX current | 300 | - | 320 | m.a. | @3.3V instantaneous power consumption, maximum transmit power in WiFi mode, and is related to the matched antenna. |
| BLE TX current | 350 | - | 450 | m.a. | @3.3V instantaneous power consumption, maximum transmit power in BLE mode, and is related to the matched antenna. |
| SLE TX current | 350 | - | 450 | m.a. | @3.3V instantaneous power consumption, maximum transmit power in SLE mode, and dependent on the matched antenna. |
| Operating temperature | -40 | - | 85 | ℃ | Industrial-grade design |
| Operating humidity | 10 | - | 90 | %rh | - |
| Storage temperature | -50 | - | 150 | ℃ | - |
| Hardware projects | Parameter value | unit | Remark |
| Chip Model | TR5336 | - | QFN40,5*5mm |
| processor | 32 | Bit | high performance |
| Maximum operating frequency | 240 | MHz | - |
| SRAM | 606 | KB | Chip Embedded |
| ROM | 300 | KB | Chip Embedded |
| FLASH | 4 | MB | Chip Embedded |
| Communication interface | UART | - | The communication voltage level is 3.0-3.6V, but 3.3V is recommended to ensure data reliability. |
| Crystal oscillator frequency | 40 | MHz | The module is already built in. |
| Module size | 16.0*11.5*2.4 | mm | @E105-WBS36SP, Length*Width*Height |
| Antenna type | Onboard PCB | - | @E105-WBS36SP |
| Packaging method | Perforated/stamp hole | - | @E105-WBS36SP |
| weight | 0.65 | g | @E105-WBS36SP |