Home >Module>SLE>TR5336
E105-WBS36S Module combiné NearLink WiFi/BLE/SLE trois-en-un, type perforé

[Interface de communication]:UART

[Protocole de communication]:SLE 1.0/WiFi 6/BLE 5.4

[Puissance d'émission]: 20 dBm

[Conditionnement]:Surface Mount

[Dimensions du produit]:16 *11,5 mm

[Poids du produit]:0.5g

[Introduction]:Le module E105-WBS36 est un SoC 2,4 GHz hautement intégré, combinant WiFi 6, BLE 5.4 et SLE 1.0. Il se caractérise par sa petite taille, ses nombreuses ressources, sa puissance et sa vitesse de transmission élevées, ainsi que par sa forte résistance aux interférences. Grâce à son jeu de commandes AT universel, la commutation de mode et la configuration des paramètres sont simples et rapides. Ce module trouve de nombreuses applications dans les objets connectés, la domotique, la sécurité domestique, la santé personnelle, l'électroménager intelligent, les accessoires et télécommandes, l'automobile, l'éclairage, l'Internet industriel, l'acquisition et le contrôle intelligents de données, et bien d'autres domaines.

RF performance Minimum value Typical value Maximum value unit Test conditions
Operating frequency band 2400 - 2500 MHz Frequency points below 2401MHz and above 2483.5MHz cannot meet the radiation requirements of the Radio Regulatory Commission, and the selection of channel frequencies must comply with protocol and regulatory requirements.
WiFi RX Sensitivity - -71 -70 dBm @11ax HE20 MCS9,LDPC 4×3.2us PER 10%,4096 octet PSDU
WiFi RX Adjacent Channel Rejection Ratio - 10 - dB @11n HT40 MCS7, useful signal -58dBm, PER 10%, 4096 octets PPDU
WiFi TX maximum transmit power 15 - 20 dBm @11ax HE20,LDPC 4x3.2us
WiFi reference communication distance - 315 - m In a clear, open, unobstructed environment, with an antenna gain of 5.0 dBi, an antenna height of 1.2 m, and a transmit power of 20 dBm...
BLE RX Sensitivity - -96 -95 dBm @BLE 2M,PER<30%
BLE TX maximum transmit power - 20 - dBm @Meets EVM and ACP requirements
BLE Reference Communication Distance - 1000 - m In a clear, open, unobstructed environment, with an antenna gain of 5.0 dBi, an antenna height of 1.2 m, and a transmit power of 20 dBm...
SLE RX Sensitivity - -93 -91 dBm @SLE 4M GFSK, PER<10%
SLE TX maximum transmit power - 20 - dBm @SLE 4M GFSK, meets EVM and ACP requirements.
SLE Reference Communication Distance - 1000 - m In a clear, open, unobstructed environment, with an antenna gain of 5.0 dBi, an antenna height of 1.2 m, and a transmit power of 20 dBm...


Electrical performance Minimum value Typical value Maximum value unit Remark
Operating voltage 3 3.3 3.6 In Output power can be guaranteed with a voltage of ≥3.3V; exceeding 3.6V carries a risk of burnout.
Communication level - 3.3 - In Using 5V TTL levels carries a risk of damage; please use level conversion circuits appropriately.
WiFi TX current 300 - 320 m.a. @3.3V instantaneous power consumption, maximum transmit power in WiFi mode, and is related to the matched antenna.
BLE TX current 350 - 450 m.a. @3.3V instantaneous power consumption, maximum transmit power in BLE mode, and is related to the matched antenna.
SLE TX current 350 - 450 m.a. @3.3V instantaneous power consumption, maximum transmit power in SLE mode, and dependent on the matched antenna.
Operating temperature -40 - 85 Industrial-grade design
Operating humidity 10 - 90 %rh -
Storage temperature -50 - 150 -


Hardware projects Parameter value unit Remark
Chip Model TR5336 - QFN40,5*5mm
processor 32 Bit high performance
Maximum operating frequency 240 MHz -
SRAM 606 KB Chip Embedded
ROM 300 KB Chip Embedded
FLASH 4 MB Chip Embedded
Communication interface UART - The communication voltage level is 3.0-3.6V, but 3.3V is recommended to ensure data reliability.
Crystal oscillator frequency 40 MHz The module is already built in.
Module size 10.0*10.0*2.4 mm @E105-WBS36S, Length*Width*Height
Antenna type SMD PIN - @E105-WBS36S, bottom pad lead-out
Packaging method patch - @E105-WBS36S
weight 0.5 g @E105-WBS36S