E105-WBS36-TB NearLink Combo Module Test Kit
[Interface d'alimentation]：USB
[Interface de communication]：UART
[Dimensions]：60*34 mm
[Introduction]：La carte de développement E105-WBS36-TB est un modèle d'entrée de gamme intégrant le module combiné E105-WBS36S pour la mémoire Flash, le Wi-Fi et le Bluetooth. Compatible avec les protocoles Flash 1.0, Wi-Fi 6 et BLE 5.4, elle dispose de broches accessibles par connecteurs externes des deux côtés, permettant ainsi aux développeurs de connecter facilement divers périphériques via des cavaliers. Cette carte peut également être utilisée sur une plaque d'essai.
Magasin officiel
| Serial Number | Main components | Sub-components | introduce |
| 1 | USB1 interface | - | It connects to the module's UART1 interface via a USB-to-serial chip for data transmission. |
| 2 | USB0 interface | - | It connects to the module's UART0 interface via a USB-to-serial chip for firmware flashing. |
| 3 | pin header | 3.3V | Connect the OLD power output pin. When using the development board, a jumper cap needs to be used to short the M3.3V pin. |
| M3.3V | Connect the module's power input pin. When using the development board, a jumper cap is required to short the 3.3V pin. | ||
| RXD1 | The serial port receive pin is a TTL level pin used for data/command transmission. | ||
| TXD1 | The serial port transmit pin is a TTL level pin used for data/command transmission. | ||
| RTS1 | GPIO_14, flow control pin (not open) | ||
| CTS1 | GPIO_13, flow control pin (not open) | ||
| IO12 | GPIO_12 | ||
| IO11 | GPIO_11 | ||
| IO10 | GPIO_10 | ||
| IO9 | GPIO_9 | ||
| IO8 | GPIO_8 | ||
| IO7 | GPIO_7 | ||
| 4 | pin header | GND | GND pin |
| GND | GND pin | ||
| GND | GND pin | ||
| TXD0 | The serial port transmit pin is a TTL level pin used for firmware flashing. | ||
| RXD0 | The serial port receive pin is a TTL level pin used for firmware burning. | ||
| IO5 | GPIO_5 | ||
| IO4 | GPIO_4 | ||
| IO3 | GPIO_3 | ||
| IO2 | GPIO_2 | ||
| IO1 | GPIO_1 | ||
| IO0 | GPIO_0 | ||
| NRST | Reset pin | ||
| 5 | NRST key | - | Reset button |
| 6 | LED | PWR | Power indicator |
| BLE | SLE/BLE connection indicator: lit: connected; off: not connected. | ||
| NET | Socket connection indicator: lit: connected; off: no connection. | ||
| WIFI | Network indicator: lit: network available; off: no network available. |