Nouveaux produits EN VENTE MagasinMagasinMagasin
Partager
English English
ENESCN
Home >Module>BLE>Other
DA14535
BLE5.3
DA14535
BLE5.3
E104-BT52X-V53 Module Bluetooth vers port série DA14535 Chip Solutions/BLE5.3, communication longue distance 250 m, antenne IPEX 3e génération

[Chip Solution]：DA14535

[Fréquence]：2,402-2,480 GHz

[Protocole Bluetooth]：BLE 5.3

[Distance de communication]： 250 m

[Dimensions]：10 x 10 mm

[Poids]： 0,4 ± 0,1 g

[Introduction]：Le module Bluetooth basse consommation E104-BT52X-V5.3 est basé sur la puce DA14535, le protocole BLE5.3 et l'interface d'antenne IPEX-3. Il prend en charge les modes Bluetooth hôte, esclave, maître-esclave et observateur, ainsi que le paramétrage des commandes AT. Il prend également en charge la diffusion basse consommation, la transmission transparente des données et la configuration OTA. Il est largement utilisé dans les objets connectés, la sécurité intelligente, la maison connectée, l'Internet industriel, l'acquisition de données intelligente et le contrôle intelligent.

Send Inquiry
Purchase
Téléchargements de fichiers Compare
PIN
Serial number Pin Name Pin direction Pin Function illustrate
1 GND input Power ground
2 VL- -- Low voltage power supply pin Low voltage power supply pin, users do not need to worry about
3 VCC input Power positive Power supply positive (short connected to pin 4 "VH+" when in use)
4 VH+ input Power positive Power supply positive (short connected to pin 3 "VCC" when in use)
5 GND input Power ground
6 GND input Power ground
7 RST input Reset pin Low level reset (takes about 500ms to take effect)
8 PART input SWEDING SWDIO, JTAG interface, users do not need to care
9 NC -- NC Users don't need to care
10 CLK input SWCLK SWCLK, JTAG interface, users do not need to care
11 NC -- NC Users don't need to care
12 GND input Power ground Power ground
13 WKP input Wake-up pin Wake up: falling edge;
Sleep: rising edge.
14 TXD Output Serial Port Serial port output
15 RXD input Serial Port Serial port input
16 LINK Output Connection Status Bluetooth connection: High level
Bluetooth no connection: low level
17 DATA Output data Data indication pin
Note:
Receiving Bluetooth data:
When there is Bluetooth data in the air, the DATA pin will be pulled high when it is sent through the TXD pin of E104-BT52/E104-BT52X/E104-BT52-V5.3/E104-BT52X-V5.3. After a frame of data is sent, the pin will be pulled low again.
Send Bluetooth data:
The DATA pin buffers 1024 bytes of data after receiving data at the RXD pin of the E104-BT52/E104-BT52X/E104-BT52-V5.3/E104-BT52X-V5.3. As long as there is data in the BUFF that has not been sent via Bluetooth, the DATA pin will be pulled high and will not be pulled low again until the data in the BUFF is sent. When sending data, users can frame the data as described above.
18 GND input Power ground Power ground