E104-BT52-V53_Other_BLE_Module

Home >Module>BLE>Other

E104-BT52-V53 DA14535 Chip Solutions Module Bluetooth vers port série, protocole BLE5.3, communication longue distance 180 m, antenne PCB intégrée

[Chip Solution]：DA14535

[Fréquence]：2,402-2,480 GHz

[Protocole Bluetooth]：BLE 5.3

[Distance de communication]：180 m

[Dimensions]： 14,5 x 10 mm

[Poids du produit]：1,2 ± 0,1 g

[Introduction]：Le module Bluetooth basse consommation E104-BT52-V5.3 est basé sur la puce DA14535 de Dialog, le protocole BLE5.3 et une interface d'antenne intégrée au circuit imprimé. Il prend en charge les modes Bluetooth hôte, esclave, maître-esclave et observateur, ainsi que le paramétrage via des commandes AT. Il prend également en charge la diffusion basse consommation, la transmission de données transparente et la configuration OTA. Il est largement utilisé dans les domaines des objets connectés, de la sécurité et de la maison connectées, de l'Internet industriel, de l'acquisition de données intelligentes, du contrôle intelligent, etc.

Send Inquiry

Purchase

Téléchargements de fichiers Compare

Serial number	Pin Name	Pin direction	Pin Function	illustrate
1	GND	input	Power ground
2	VL-	--	Low voltage power supply pin	Low voltage power supply pin, users do not need to worry about
3	VCC	input	Power positive	Power supply positive (short connected to pin 4 "VH+" when in use)
4	VH+	input	Power positive	Power supply positive (short connected to pin 3 "VCC" when in use)
5	GND	input	Power ground
6	GND	input	Power ground
7	RST	input	Reset pin	Low level reset (takes about 500ms to take effect)
8	PART	input	SWEDING	SWDIO, JTAG interface, users do not need to care
9	NC	--	NC	Users don't need to care
10	CLK	input	SWCLK	SWCLK, JTAG interface, users do not need to care
11	NC	--	NC	Users don't need to care
12	GND	input	Power ground	Power ground
13	WKP	input	Wake-up pin	Wake up: falling edge;
13	WKP	input	Wake-up pin	Sleep: rising edge.
14	TXD	Output	Serial Port	Serial port output
15	RXD	input	Serial Port	Serial port input
16	LINK	Output	Connection Status	Bluetooth connection: High level
16	LINK	Output	Connection Status	Bluetooth no connection: low level
17	DATA	Output	data	Data indication pin Note: Receiving Bluetooth data: When there is Bluetooth data in the air, the DATA pin will be pulled high when it is sent through the TXD pin of E104-BT52/E104-BT52X/E104-BT52-V5.3/E104-BT52X-V5.3. After a frame of data is sent, the pin will be pulled low again. Send Bluetooth data: The DATA pin buffers 1024 bytes of data after receiving data at the RXD pin of the E104-BT52/E104-BT52X/E104-BT52-V5.3/E104-BT52X-V5.3. As long as there is data in the BUFF that has not been sent via Bluetooth, the DATA pin will be pulled high and will not be pulled low again until the data in the BUFF is sent. When sending data, users can frame the data as described above.
18	GND	input	Power ground	Power ground

