E104-BT5010A Ebyte nRF52810 ble 5.0 carte de test de module ble balise ibeacon 2.4g rf module carte de développement kits interface usb
[CI]：nRF52810
[La fréquence]：2.402~2.480GHz
[Protocole]：BLE5.0
[Du pouvoir]：3.8dBm
[Distance]：55m
[Taille]：11.5*16mm
[Lester]：0.8±0.1g
[Poids du produit]：0.8±0.1g
[Introduction]：De petite taille et à faible consommation d'énergie, E104-BT5010A est un module série vers BLE basé sur BLE 5.0 fonctionnant à 2,4 Ghz. Il fonctionne à la fois comme maître et esclave ble. Basé sur nRF52810 de Nordic.
Magasin officiel
| No. | Item | Direction | Application | Remarks |
|---|---|---|---|---|
| 1 | GND | Input | Ground | - |
| 2 | P0.25 | - | NC | - |
| 3 | P0.26 | - | NC | - |
| 4 | MOD | Input | Mode selection | Low level：configuration mode；High level：transparent mode |
| 5 | WKP | Input | Wake up pin | Wake up：falling edge；Sleep：rising edge。 |
| 6 | DISC | Input | Connection pin disconnected | Internal pull up. Valid in |
| 7 | LINK | Output | Link status | Ble link：low level No ble link：high level |
| 8 | DATA | Output | Data indicator | Data indication pin, when the module outputs data through the serial port, the module sets the DATA pin to low level, indicating that data is being sent. AT command response does not change the DATA pin state. |
| 9 | GND | - | Ground | - |
| 10 | P0.02 | - | NC | - |
| 11 | P0.03 | - | NC | - |
| 12 | P0.04 | - | NC | - |
| 13 | P0.05 | - | NC | - |
| 14 | P0.06 | - | NC | - |
| 15 | P0.07 | - | NC | - |
| 16 | GND | - | Ground | Ground |
| 17 | VCC | - | Power | Power |
| 18 | RXD | Input | UART RX pin | - |
| 19 | TXD | Output | UART TX pin | - |
| 20 | RTS | Output | Flow control | Internal pull up |
| 21 | CTS | Input | Flow control | Internal pull up |
| 22 | P0.21/RST | - | Power reset | Valid in low level |
| 23 | SWDCLK | - | - | - |
| 24 | SWDIO | - | - | - |