Home >Module>BLE>nRF528**
E104-BT5005A Fabricants de modules BLE BLE 5.0 certifiés avec service OEM Module BLE ibeacon Nordic nRF52805

[CI]:nRF52805

[La fréquence]:2.402~2.480GHz

[Protocole]:BLE5.0

[Taille]:9*9mm

[Poids du produit]:0.35g

[Lester]:0.35g

[Introduction]:E104-BT5005A est un module intégré maître-esclave BLE série vers BLE basé sur la version 5.0 du protocole BLE. Il est de petite taille et consomme peu d'énergie. Il fonctionne dans la bande de fréquence 2,4 GHz.

E104-BT5005A
No. Pin item Direction Function Application
1 SWDIO -- -- --
2 SWCLK -- -- --
3 P0.21/RST Input Power reset Active low
4 VCC -- -- The power supply is positive, the recommended power supply voltage>=3.3V
5 GND -- -- Power ground
6 DISC(P0.12) Input Disconnect pin Internal pull up. Active on falling edge
7 WKP(P0.05) Input Wake-up pin Wake up: falling edge;Sleep: rising edge
8 P0.00 Input/Output -- General GPIO
9 MOD(P0.04) Input Mode selection Low level: configuration mode; High level: transparent transmission mode.
10 P0.01 Input/Output -- General GPIO
11 RXD(P0.20) Input UART RX pin --
12 TXD(P0.14) Output UART TX pin --
13 LINK (P0.16) Output Connection Status Bluetooth connectivity:Low level Bluetooth is not connected:High level
14 GND -- -- Grand
15 DATA (P0.18) Output Data indication Data indication pin, when the module outputs data through the serial port, the module sets the DATA pin to low level, indicating that data is being sent. AT command response does not change the DATA pin state.