E104-BT11G-PCB UART mesh V1.0 module de réseau ad hoc BLE maillé standard
[La fréquence]：2402~2480MHz
[Modulation]：GFSK
[Intervalle]：200m (antenne PCB)
[Taille]：19*13mm (version PCB)
[Poids du produit]：0,8 ± 0,1 g (version PCB)
[Introduction]：Le module de réseau ad hoc E104-BT11G-PCB BLE mesh prend en charge la norme sig mesh V1.0, et la théorie du réseau unique peut accueillir jusqu'à 10 922 périphériques de nœud. L'appareil mémorise automatiquement les informations du réseau après s'être connecté au réseau.
| No. | Function | Description |
|---|---|---|
| 1 | GND | Ground,connect to power reference ground |
| 2 | PWN | N/A |
| 3 | PWN | N/A |
| 4 | PA00 | N/A |
| 5 | PA03 | N/A |
| 6 | N.C | - |
| 7 | N.C | - |
| 8 | PA04 | N/A |
| 9 | PA05 | N/A |
| 10 | SWD | - |
| 11 | SWC | - |
| 12 | N.C | - |
| 13 | NetLink | Network indicator,pin outputs high level after successfully networking |
| 14 | PD04 | N/A |
| 15 | PWM | N/A |
| 16 | PD03 | N/A |
| 17 | TXD | TX pin of UART,for UART receiving |
| 18 | RXD | RX pin of UART,for UART transmitting |
| 19 | VCC | Power supply 1.9～3.6V（It is recommended to add a ceramic filter capacitor externally） |
| 20 | GND | Ground,connect to power reference ground |
| 21 | PC02 | N/A |
| 22 | PC03 | Low-power role selection pin (internal pull-up):Low power consumption role: pull up or float;Other roles: Go directly to the ground. |
| 23 | PC04 | Reset. Except for hardware information (UART configuration),allfactory settings are restored. |
| 24 | Wake up | The wake-up pin is valid in low level under low power mode |
| 25 | RST | Chip reset trigger input pin,valid in low level |
| 26 | GND | Ground,connect to power reference ground |