Home >Module>WiFi>Other
E103-W14X Module Wi-Fi et BLE Prend en charge les protocoles AP, STA, AP+STA BLE 5.2 Protocole MQTT/MQTTS

[Tension de fonctionnement]:2,7-3,6 V

[Protocole de communication]:IEEE 802.11b/g/n + BLE5.2

[Puissance de transmission]:18 dBm

[Distance de communication]:500 m

[Taille du produit]: 10*10mm

[Introduction]:Le module Wi-Fi + BLE E103-W14X est un module d'antenne IPEX à faible consommation et économique développé par Ebyte, qui est conforme aux spécifications des protocoles standard BLE5.2 et IEEE 802.11b/g/n. Ce module WiFi intègre les ressources matérielles et logicielles nécessaires aux applications Wi-Fi et BLE complètes, prend en charge les modes de fonctionnement Wi-Fi AP, STA, AP+STA 3 et BLE basse consommation, et est très adapté aux applications à faible débit et aux applications d'acquisition de données telles que la maison intelligente et le contrôle industriel.

PIN
Pin numberPin namePin typePin usage
1GND-power ground
2NC-empty legs
3VBAT-VCC recommended 3.3v
4GPIO24I/OGPIO
5GND-power ground
6GND-power ground
7CEN-The chip enable pin is active at high level (the module has an internal pull-up, and customers can use this pin to implement the hardware reset pin function).
8ADC1IAnalog input pin (no software function yet)
9GPIO6I/OGPIO
10GPIO8I/OGPIO
11NC-empty legs
12GND-power ground
13GPIO9IDefault SLEEP wake-up pin (valid on rising edge or falling edge, related to customer's actual configuration)
14TXDTHEModule serial port sending
15RXDIModule serial port reception
16GPIO1I/OGPIO
17GPIO0I/OGPIO
18GND-GPIO