E101-S3WN8-XS Module WiFi double cœur, puce ESP32-S3 Ble 5.0
[Solution de puce]：ESP32-S3
[Fréquence de fonctionnement]： 2,4 GHz
[Distance de communication]：200 m
[Type d'interface]：E/S UART
[Protocole pris en charge]： 802.11 b/g/n + BLE5.0
[Poids du produit]：2±0.1g
[Introduction]：E101-S3WN8-XS est un module sans fil double cœur Wi-Fi + ble. Convient à une variété de scénarios d'application dans le domaine de l'AIoT, tels que la détection de mots de réveil et la reconnaissance de commandes vocales, la détection et la reconnaissance de visages, la maison intelligente, les appareils électroménagers intelligents, etc. Ce module WiFi ble double cœur utilise une antenne PCB intégrée .
Absolute maximum ratings
| Symbol | Parameter | Minimum value | Maximum value | Unit |
| VDD33 | Power pin voltage | –0.3 | 3.6 | V |
| TSTORE | storage temperature | –40 | 85 | °C |
Recommended working conditions
| Symbol | Parameter | Minimum value | Typical value | Maximum value | Unit |
| VDD33 | Power pin voltage | 3 | 3.3 | 3.6 | V |
| IVDD | Supply current from external power supply | 0.5 | — | — | A |
| T | Recommended operating temperature | –40 | — | 85 | °C |
| Humidity | humidity | — | 85 | — | %RH |
DC electrical characteristics (3.3V, 25℃)
| Symbol | Parameter | Minimum value | Typical value | Maximum value | Unit |
| CIN | Pin capacitance | — | 2 | — | pF |
| VIH | High level input voltage | 0.75×VDD1 | — | VDD1 + 0.3 | V |
| VIL | low level input voltage | –0.3 | — | 0.25×VDD1 | V |
| IIH | High level input current | — | — | 50 | nA |
| IIL | Low level input current | — | — | 50 | nA |
| VOH2 | High level output voltage | 0.8×VDD1 | — | — | V |
| VOL2 | Low level output voltage | — | — | 0.1×VDD1 | V |
| IOH | High level current source (VDD1= 3.3V,VOH>=2.64V,PAD_DRIVER=3) | — | 40 | — | mA |
| IOL | Low level current sink (VDD1=3.3 V, VOL=0.495 V, PAD_DRIVER=3) | — | 28 | — | mA |
| RP U | Internal weak pull-up resistor | — | 45 | — | kΩ |
| RP D | Internal weak pull-down resistor | — | 45 | — | kΩ |
| VIH_nRST | Chip reset release voltage (EN pin should meet the voltage range) | 0.75×VDD1 | — | VDD1 +0.3 | V |